For a 07 Apex GT
In the 07 Supplementary Service Manual the rear suspension spring preload range = 10.59" to 11.29"/ My dealer called Yamaha Tech and he stated 10.43 to 11.3/ The sticky in this forum said 10.3 to 11.3.
This may seem small but this is a difference of 30% or .3" difference. Just recieved a 07 Apex GT and am trying to set the correct preload. It appears to be no difference in springs between years. Any ideas on what is the correct minimum measurement ?
Thanks
GT
In the 07 Supplementary Service Manual the rear suspension spring preload range = 10.59" to 11.29"/ My dealer called Yamaha Tech and he stated 10.43 to 11.3/ The sticky in this forum said 10.3 to 11.3.
This may seem small but this is a difference of 30% or .3" difference. Just recieved a 07 Apex GT and am trying to set the correct preload. It appears to be no difference in springs between years. Any ideas on what is the correct minimum measurement ?
Thanks
GT
yamadoo
Yamadoo is a snowmobile ' aholic'.
- Joined
- Jun 3, 2003
- Messages
- 3,645
- Reaction score
- 1,501
- Points
- 1,753
- Country
- USA
- Snowmobile
- 15 Viper STX DX red/white- GPS and KING AIR suspension 4kmiles
13 Apex XTX 45 anniversary RED/WHITE/BLACK 3K miles
10 Vector LTX Blue 9kmiles
11 Venture GT 4k miles
86 SnoScoot(2) for grand kids
Gt there is a "sticky Post" at the top to the list that describes this nicely. For some reason with the mono they want more precise shock compression measurement and not ride hieght. Not hard to do, I just made a piece the right length and adjusted spring load until it fit with a little wiggle room.
Yamadoo
Yamadoo
