StillCold
Newbie
- Joined
- Feb 24, 2015
- Messages
- 6
- Reaction score
- 1
- Points
- 33
- Country
- USA
- Snowmobile
- 2003 RX-1
I'm trying to fix my w arm as the mechanic at the dealer missed all 5 cracks while replacing my track, limiter straps, slides, and bogey wheels. So instead of trashing it for new this is what I came up with. Will this work? Did I do this correctly? Or am I in a world of poo. Trying not take it too heavy.
Attachments
Bigfish
Extreme
- Joined
- Sep 7, 2009
- Messages
- 110
- Reaction score
- 3
- Points
- 718
- Location
- Ontario
- Country
- Canada
- Snowmobile
- 15 RS Venture TF
04 RX-1 ER
I hate to say it, But I've been there and done it.
That arm is scrap! Start searching EBay or call a dealer, for a new one.
That arm is scrap! Start searching EBay or call a dealer, for a new one.
BigDogrx1
TY 4 Stroke Guru
- Joined
- Dec 2, 2014
- Messages
- 891
- Reaction score
- 240
- Points
- 438
- Location
- SOO (UP) MI
- Country
- USA
- Snowmobile
- 2003 rx1
Everyone I've seen reinforced is wrong.
They all are stronger side to side but not re-iforced for up and down hits.
It's about same money to just buy a used skid that's a better ride like a mono skid?
Here's my RX with a 08 mono skid installed.
They all are stronger side to side but not re-iforced for up and down hits.
It's about same money to just buy a used skid that's a better ride like a mono skid?
Here's my RX with a 08 mono skid installed.
