RX1CICERO
Newbie
I need to replace the two heat shields that "sandwich" the exhaust manifolds just off the engine. I bought replacements and need to somehow remove and replace those 5 rivets in lower shield. (PIC POSTED) There isn't room with the rivet gun I have as the engine is above rivets. Any advice from someone successful. View attachment 175025
Brotherdan
Expert
- Joined
- Sep 8, 2017
- Messages
- 374
- Reaction score
- 149
- Points
- 458
- Location
- Belmont,maine
- Country
- USA
- Snowmobile
- 2011 apex xtx blue, starr suspension,gytr front shocks,camso 1.5 track cut down, snowtrackers work in process,2003 rx1er originally 121 converted to 136"monoshock 2 ck136 rear suspension with clicker vector ltx shock,muffin works tunnel extension, seat concepts(wrp) seat,apex hooked handlebars converted to all underhood wiring,8"lake effect billet aluminum riser,gytr frontshocks,yamaheater hand warmer kit,rocks ridelite,rocks power supply, rocks heated bag,, tunnel braces,blue skid plate,garmin gps, aggressive snowtrackers on apex single keel skis,rollerski ski wheel kit,108 warthog studs&blue studboy backers,pioneer wheel lowering kit, dupont slides, 4th wheel kit,yamaha saddle, tank& windshield bags, powermadd led handguards, bar mount mirror kit, apex radiator& electric fan added, apex rear cooler,autometer temp guage, apex new style large diameter drive shaft with extroverts machined for chaincase,thunder products clutching,1987 enticer 340ltr 2100miles,1984 enticer 340,1996 wolverine 350,big wheel kit,winch,racks,k&n,full skidplates
Your pics may be too large as I cannot view them,which shields are you trying to replace
Attachments
RX1CICERO
Newbie
RX1CICERO
Newbie
The ears of top and bottom shields where bolted together to form a sandwich around exhaust manifolds are broke from both sides. The bottom shield #9 is the culprit and is riveted to bottom tunnel.
Brotherdan
Expert
- Joined
- Sep 8, 2017
- Messages
- 374
- Reaction score
- 149
- Points
- 458
- Location
- Belmont,maine
- Country
- USA
- Snowmobile
- 2011 apex xtx blue, starr suspension,gytr front shocks,camso 1.5 track cut down, snowtrackers work in process,2003 rx1er originally 121 converted to 136"monoshock 2 ck136 rear suspension with clicker vector ltx shock,muffin works tunnel extension, seat concepts(wrp) seat,apex hooked handlebars converted to all underhood wiring,8"lake effect billet aluminum riser,gytr frontshocks,yamaheater hand warmer kit,rocks ridelite,rocks power supply, rocks heated bag,, tunnel braces,blue skid plate,garmin gps, aggressive snowtrackers on apex single keel skis,rollerski ski wheel kit,108 warthog studs&blue studboy backers,pioneer wheel lowering kit, dupont slides, 4th wheel kit,yamaha saddle, tank& windshield bags, powermadd led handguards, bar mount mirror kit, apex radiator& electric fan added, apex rear cooler,autometer temp guage, apex new style large diameter drive shaft with extroverts machined for chaincase,thunder products clutching,1987 enticer 340ltr 2100miles,1984 enticer 340,1996 wolverine 350,big wheel kit,winch,racks,k&n,full skidplates
If you dont have an adjustable head hand riveter( I believe mine is a stanley brand) theres no issue with using stainless steel button head Allen bolts & locknuts, alot of these pieces are assembled at the factory before the engine is installed
