JIM
Extreme
That is some serious throttle responce. How much would this set up cost if some did all the fabbing themselves? Sounds like you have it dialed in good. Can that make more boost? say 14-15 lbs?
mulot30th
Lifetime Member
- Joined
- Jul 7, 2007
- Messages
- 1,634
- Reaction score
- 2
- Points
- 1,073
- Website
- youtube.com
- Country
- Canada
- Snowmobile
- 2023 thundercat
apex mountain crracing 174
apex blower 136 for asphalt racing
osp drag race sled (apex engine based)
This little blower could make up to 11.5-12 psi of boost but I have it at around 9-10 psi, the hp goal was right where I have it now.
More boost would require a little bigger blower as this one is pretty small.
Cost to fab this?
well, the blower by itself (lysholm/opcon) is pretty expensive t obegine with 2500$ for the blower alone.
around 5K if you fabricate everything should be able to make the same setup as I have. More if you choose to get it fabbed by someone else of course.
More boost would require a little bigger blower as this one is pretty small.
Cost to fab this?
well, the blower by itself (lysholm/opcon) is pretty expensive t obegine with 2500$ for the blower alone.
around 5K if you fabricate everything should be able to make the same setup as I have. More if you choose to get it fabbed by someone else of course.