TORS

Matt Daniels

Newbie
Joined
Nov 26, 2016
Messages
10
Reaction score
1
Points
413
Location
Brighton, MI
Country
USA
Snowmobile
2017 SR Viper XTX SE
I notice the TORS system on my Nytro seems to activate only when I try and make sharp turns, typically navigating through the woods. Is the throttle cable being pinched in a way that activates the system? If so, are there any simple remedies to fix this? I considered disconnecting it, but the videos of runaway machines (while amusing when no one is hurt) has me wanting to play it safe. Has anyone else had similar problems and how were they fixed. Thanks again and all dialogue is appreciated.
 
Adjustment can be made at the handlebar riser, there's a rubber boot with an adjustment long nut and jam nut. If you notice the throttle lever is tight against the throttle block with almost no play it needs adjustment. Losses the jam nut and rotote the long nut looking thingy, (simarlar to adjusting brakes on a bicycle) until you have a couple to a few millimetre's of play on the throttle lever. ADJUSTMENTS MADE WITH ENGINE OFF !!! Then hold brake, start it up and turn handle bars full left to right. Repeat as necessary.
 
Here you go.
NytroTcable.PNG
 


Back
Top