Want to stud my track

[yamafarm]

I have a 07 Phazer GT. I am going to stud the track this summer. What I want to know is how many studs should I use,and how long of a stud, and is there a good pattren to follow?
Also any recomendations on exhaust? I am open to suggestions I am going to change it thats for sure.


Thanks,
Later,
Will

 

[yamafarm]

Anybody gonna chime in here? I really could use some advice on the stud issue.


Later,
Will

 

[swamps]

I just studded my 130 hp triple with 144 picks. I would say go 144 if you want but that's a little much.

I think 96 picks would be more your range for your horsepower.

Couple of good stud patterns on this page, you can click on the images and print them out.

http://www.studboytraction.com/stud_patterns.htm

 

[yzf1999]

It's usually 1 stud per horsepower..

 

[no4smoke]

I went with 96 studs right up the middle. I put on the Get-R-Done kit from Hauck and was very impressed. (I would use tunnel protectors with any stud.) Also going to do the Excell with some other products from Ulmer on the other Phazer.