JDMCRX
TY 4 Stroke Junkie
- Joined
- Dec 13, 2005
- Messages
- 655
- Reaction score
- 1
- Points
- 873
- Location
- OTTAWA, ONTARIO CANDADA
- Website
- www.jbauto.ca
Well good news sled does not over heat as much with the new rear heat exchanger.
Me and my buddies 03 RX-1 stock for stock From the launch id get him half lenght then by about 80km he would start pulling like 3-4 lenghts on me to 190km.
New clutch setup we race now same place 8 times
Off the launch i get hem 3-4 lenghts and top at about 150km im still ahead 4-6 lenghts pulling strong.
Im happy with the set up holds 10,500 rpm im gonna do my air box mods and HOLTZ red springs and 157 mains and see how much better it gets.
josh
Me and my buddies 03 RX-1 stock for stock From the launch id get him half lenght then by about 80km he would start pulling like 3-4 lenghts on me to 190km.
New clutch setup we race now same place 8 times
Off the launch i get hem 3-4 lenghts and top at about 150km im still ahead 4-6 lenghts pulling strong.
Im happy with the set up holds 10,500 rpm im gonna do my air box mods and HOLTZ red springs and 157 mains and see how much better it gets.
josh
JDMCRX
TY 4 Stroke Junkie
- Joined
- Dec 13, 2005
- Messages
- 655
- Reaction score
- 1
- Points
- 873
- Location
- OTTAWA, ONTARIO CANDADA
- Website
- www.jbauto.ca
newrx1guy
Extreme
What all have you done to it clutching wise? Thanks
black john
TY 4 Stroke Guru
exellent
thats great
that sounds like a 8-12 sled gain over what you started with 8)
thats great
that sounds like a 8-12 sled gain over what you started with 8)
JDMCRX
TY 4 Stroke Junkie
- Joined
- Dec 13, 2005
- Messages
- 655
- Reaction score
- 1
- Points
- 873
- Location
- OTTAWA, ONTARIO CANDADA
- Website
- www.jbauto.ca
Dalton 57.5 weights,Dalton BSB primary spring,Yam Black Secondary 70deg,52R46 dalton helix.
Thats all what a difference.
Thats all what a difference.
