Search results

I have an 07 Phazer I’ve acquired. It starts and runs good, it will not rev past 8700-9000rpm. Bottom end pulls strong, just the engine surges, on the stand or testing it’s the same. Fuel pressure okay, it’s not the tors as it’s bypassed. been a lot of hands on this in the past. Sleds been...

I'm looking for options for my wife's 2007 Phazer MTX rear shocks. The front rear is bad but even changing both might be an idea. Any info on what people have done would be appreciated, cross overs from other brands too. Thanx guys.

Found a blown up Phazer MTX last year cheap (guy was running 17psi boost) and dropped a valve. I rebuilt it all. I am still running the complete turbo system but no head shim. My thinking is a no head shim low boost setup, like 5 or 6 psi. I did very little testing last year before the snow...

So on my Nypex I am still having a problem with oil consumption. I upgraded to the GTX2860 turbo last year and love it but still find my sled using oil throughout the day. Im 99 % sure its going through the turbo. I am running the oil line teed off the oil pressure sensor with Powder Lites line...

I have a customers 06 Apex in my shop with a MCX 260 kit that was installed by the previous owner. He brought me this unit and I went right through it repairing all sorts of connections and small issues. The aux injectors were not firing and I had to replace the MCX plug at the control box. Unit...

I was wondering what my options are for the rear shock on my wifes 2007 Phazer MTX. I just bought this for her and the old owner said it was getting weak. Thanx for any info.

After some research and talking its been mentioned that the stock fuel pressure regulator has been an issue with these things causing either lean conditions or lighting the sled on fire. This one dropped 2 exhaust valves but I found melted aluminum throughout the exhaust. Im rebuilding it but no...

Anyone found a replacement cartridge for the Phazer MCX Mitsubishi turbo? MCX takes the tags off it and they appear very illusive. Prince George said they are no longer available, I tried emailing MCX in Sweden with no response. When you talk to a Mitsubishi turbo dealer they seem to need the...

I bought a 07 turbo Phazer fairly cheap a couple of weeks ago and it had dropped 2 valves on one cylinder. I have lined up engine parts but just found the turbo took some of the parts through it and was wondering if anyone knows where to get parts for these turbos? MCX here in Canada said they...

Okay I got a turbo Phazer cheap that I am rebuilding for my wife here and it has the MCX kit on it. I was wondering on leaving the head shim out to retain the bottom end and running low boost, maybe 6 or 7 psi?? Has anyone done this? We do it all the time with our 180 kits for our Nytros but...

Hey there guys, I just picked up a 2007 Yamaha Phazer Mountain with a 151x2 track and a MCX turbo on it. Got it cheap cheap because it dropped a valve and wrecked the head, the cylinders are good with some nicks so am getting it replated. I am after a few things if someone can help though, I...

Hey there guys, what are most guys using to bolt their turbo to their header? Welding studs on the header or grade 8 bolts, should a guy go stainless or not? I know starting the 2 nuts are a pain but just looking for options. Thanx Shad

I need to make a new downpipe for my Nypex. I have a different header that is making me change my exhaust a little. It will come out from the turbo about 4 inches then down through the tunnel about 10 inches or so. I was going to use 3inch stainless off the flange but was wondering if building a...

I am on year 3 with my Nypex and have always had the oil burning problem mostly on start up. If I start it in a warm shop and it runs for about 30 seconds or so its okay but the next time I fire it up blue smoke from the exhaust. I have no oil through the cold side into the charge tube but see...

I am eliminating my handlebar warmers and just cut the wires to the grips giving my a code 81 of course. What are my options to get around this. Do I need to wire in resistors or can I just connect the wire in some way to get rid of this on my gauge. Thanx for any help. Shad

I have been running my Nypex for 2 years now and am changing my fuel system to the boost it system this year. I am installing the Boost-it kit and up to this point I was running the Boondocker box with slightly modified injectors and Daves methanol injection kit. I likes using the meth for the...

I have a Garrett 2860 turbo and I am wondering if this is the same as a T28 series. I am looking at a Russell drain flange and it says it fits the T25-T28 and T03. Just want to make sure it will fit my turbo. Thank you. Shad

Hello guys looking to restrict my oil feed on my 2860 turbo. I have it on my Nypex project and am looking to go down from the 35thou down to maybe 28 or so. I have the drain as large as I can go, its a gravity drain system. What is the best way to do this? I would prefer a brass fitting for my...

Hi there guys, been running my Nypex for 2 years now with great success and I will be looking to upgrade my fuel system for next season. I have been running the Boondocker box with good results but looking to go stand alone or an aux injector style system. I run about 16 psi on my Apex engine...

Okay so I spent all day at a buddies house trying to straiten out his 2006 Boondocker Apex problems. Here is the history, he bought it for cheap and didnt get any run time on it and found out there had been a fire at one time, meltied some wiring. He did a leak down on the engine and found some...