Recent content by Corneroffice

Update: Needed to replace the vent hose that is on the back of the HX and connects to the reservoir. small crack in the line. Pain in the A## to get to but done. 35 mi test ride and Im happy to be back on the sled. with over 3' of snow in the past week I need to get out and enjoy it. thanks for...

OK, everything is back together! Added anit-freeze and of course I have a slow leak coming from the short hose out of the HX. its a PITA to get to and the hose is so short its very difficult to work with. Im getting a new hose today and plan on getting it as warm as I can (boil in water) to...

Update: I have been trying to get the Heat X out but there are 3 rivets that sit behind the secondary that I need to get too. I have been wrenching on the secondary bolt for a few and it wont budge. Im going to put some air to it to see if I can break it loose, but didnt know if it was a right...

update: I was able to get the drive axle out without issue. waiting for the heat X to show up today. thanks for the help

thanks! ill give it a go.

I need to replace the front heat X in my 04 RX1. Its beyond saving, hit something hard which bent it into the track then the picks did a number on it. so my issue is I cant get the drive axle out of the sled chaise. I have removed the speedo and can get to the left side bearing. Removed the...

Thanks Dan and make sure your air box is on correctly this sled will not perform with the air box not on correctly.

Worked this time too! What made it nice is the bogie wheel nut that was already removed fit perfectly. Got the parts and should be back in action for the weekend famous last words ;)!

thanks for the suggestion on the impact gun, I dont have one but going to borrow one tonight to see if that will work. Stomper - I tried the reinstall/removal 2x and was not having success, I can see how this would be the trick (if the pivot arm was not distroyed) keep you posted - thanks!

Here is an update The Pivot arm was broken in 4 different places, kind of a mess. Most of it is coming out without issue, most. Last bolt of course. One the upper shaft of the pivot arm I was able to remove the left bolt (down where your left foot would go). Went to the right side and it...

track slapping the tunnel is how I would describe it - add the sound of picks scrapping over aluminum and that's it

Thanks for the follow up. I dont think this is anything normal, as its progressively getting worse and now to a point where I dont want to ride it... Here is a pic that I took this am with the sled lifted and thawed a bit. the track sag is a good 2-3" - that cant be ideal. going to see if I...