Recent content by DS22-HuberWoodsME

YIKES! Luckily I have friend who will do it with confidence for cheap. I hate to say it, but the MTX has been replaced with a Summit, and now on the way to be traded in for a Can-am Maverick. Sure, was fun for a while tho!

DANG FLAMMIT. Just as I expected. Thanks for the reassurance.

Researched this topic but did not hear the exact answer I am looking for... I let a guy use my 2015 Viper that has the MPI full kit. Brings it back and it wouldn't start right up to unload, which it always starts up easy. I always let the fuel pump cycle wait a second longer than crank up and...

Yes sir the MPI is what I have and it does sound pretty good, but look at all that space/weight you can free up!

Thats what I was thinking. Might just swap it out for one that breathes better, but also won't call the Game Warden in.

Tore into this sled way deeper than I thought I ever would. Have learned ALOT about. Love these machines

thats my back yard! Sweet trail out that way

I have the stage 2 MPI full kit for my 2015 MTX. I notice my MPI exhaust is really heavy, wondering if a light weight exhaust replacement like MBRP might be beneficial for weight loss/handling etc. I am wondering if I would lose HP if the MPI exhaust is in tune with the rest of the sled. What...

Update: All good now! I did end up splitting the caliper because the pistons came out just a bit too far to allow for the space of the rotor/shaft/pads to tie in together. It was good to inspect the caliper anyway. The assembly slid on nicely. Now to do a little brake bleed with my new brake...

well I have plenty of those lined up haha. Thanks for your input I will get after it!

Pads are off yes. So I just need to hold my tongue just right and it should go

I just put a replacement track on my 2015 MTX. My first endevor tearing into the Viper that deep, I learned a lot about he machine! I have the chain case all reassembled, leaving me with just the brakes to reinstall. I did not split my caliper, just unbolted the 3 bolts from the frame and...

Great info guys! My 2015 MTX is loose in a major way. I have tried to tighten the 17mm nut but the bolt body spins. Sounds like I should order the bracket also because I am guessing mine is broke

I have the same issue but when I go to tighten that 17mm but, the bolt also turns… and therefore can not tighten. Any recommendations there guys? Something broke ?

Any recommended bearing to replace the factory? Greaseable better likely?