KnappAttack's latest activity
-
KnappAttack replied to the thread Hurricane turbo intake upgrade.I suppose the chassis could be loosing out on 7% efficiency some where, plus the fact they are not making the power claimed, which most... -
KnappAttack replied to the thread Odd Issue "Solved".Check the fuel pump plugs. Happened to me in a field where it just quit one day riding alone in the middle of no where. The next day...
-
KnappAttack replied to the thread Hurricane 270 tune difference compared to 300 header tune?.Tim is talking about the 50% part throttle where the boost is up around that 23 lbs and hitting the boost cut. In some instances it will...
-
KnappAttack replied to the thread Why are the idler wheels smaller on 2020+?.Correct. The idea is to lift the studs out of the ice before needing to roll around the rear wheels. It's worth quite a bit for speed...
-
KnappAttack replied to the thread Hurricane 270 tune difference compared to 300 header tune?.You have to remember that 998 guys are a greedy bunch, and they are running hardware beyond what the tune was developed on. I dont care...
-
KnappAttack replied to the thread Why are the idler wheels smaller on 2020+?.When drag racing and speed running, we'd take all the wheels completely off, even moved the back wheels upwards on the rails to ride...
-
KnappAttack replied to the thread Whip or extension plug.I fail to see why one would need this extension. You're not supposed to do a boost check on the sled gauge, or it will code out and...
-
KnappAttack replied to the thread Paging Ms. La Niña, Ms. La Niña pickup line 998.....Got out yesterday as we got 12.5" wet heavy stuff here. Too bad it couldn't have come in Dec. put 50 miles on, too many trees down along...
-
-
KnappAttack replied to the thread Anyone trail riding with slydog command skis?.I was also going to say they 6.9's are nothing to right home about. I'll use them for low snow conditions with a Slim Jim or Duece bar...
-
KnappAttack replied to the thread TAPP ramp wear?.OEM Original Ski-Doo TRA Clutch Rollers +1MM 12.5 Grams New. Don't use the Thunder Product rollers, they just don't last very long...
-
KnappAttack replied to the thread TAPP ramp wear?.It does come out yes. Eventually it will polish itself up, which is fine as long as you don't "rotate the bolt/axle" when changing...
-
KnappAttack replied to the thread Measuring offset.Clutches don't run "cool" when under power and in deep snow. Maybe going down the trail cruising with a lot of air going thru under the...
-
KnappAttack replied to the thread TAPP ramp wear?.I learned early on that the roller bushings used in the TAPP supplied rollers are prone to wear fast as well. I replaced them with...
-
When I ordered my Tapp Roller Spider when they first came out, Tapp recommended the Blue spring as they were having some cases with the...
-
KnappAttack replied to the thread TD/GAP Big Turbo first impressions.No, the button TAPP does not rattle at idle, it does rattle just a bit in the 4500 RPM range after it's been run for some time, but...
