Nikolai's latest activity

  • Nikolai
    Nikolai replied to the thread Nyper build thread.
    I have a 7075 bolt coming to the replace the Ti bolt currently securing the speedo gear lol. Ordered some 7075 hardware for the skis a...
  • Nikolai
    Nikolai reacted to 74Nitro's post in the thread Nyper build thread with Like Like.
    Pretty. When Yamaha came out with the 700 Viper in 2002, it featured the first digital speedo. The sensor gear mounted on the end of the...
  • Nikolai
    Nikolai replied to the thread Nyper build thread.
    A little more bling. Always wanted to replace the 8mm engine mount and starter bolts with Ti.
    • IMG_0649.jpeg
    • IMG_0650.jpeg
    • IMG_0651.jpeg
  • Nikolai
    Nikolai replied to the thread Nyper build thread.
    Trimmed down both steel mounts to match the rounded off straps. Left the rear a-arm sleeve unmodified. On the fronts, the shoulder...
    • IMG_0645.jpeg
    • IMG_0644.jpeg
    • IMG_0642.jpeg
    • IMG_0643.jpeg
  • Nikolai
    Nikolai reacted to earthling's post in the thread Nyper build thread with Like Like.
    It makes sense that with the front flange forward and rear flange the opposite there should be some tension in the arms so that the...
  • Nikolai
    Nikolai replied to the thread Nyper build thread.
    True. For now I think I’ll leave the back one unmodified so the a-arm/ball joint is in the correct position and then just modify the...
    • IMG_0613.jpeg
    • IMG_0609.jpeg
    • IMG_0611.jpeg
    • IMG_0610.jpeg
    • IMG_0614.jpeg
    • IMG_0612.jpeg
    • IMG_0604.jpeg
    • IMG_0600.jpeg
    • IMG_0599.jpeg
    • IMG_0603.jpeg
    • IMG_0601.jpeg
    • IMG_0602.jpeg
  • Nikolai
    Nikolai reacted to 74Nitro's post in the thread Nyper build thread with Like Like.
    Both pics wrong. The front flange faces forward and the rear flange faces rearward.
  • Nikolai
    Nikolai replied to the thread Nyper build thread.
    That’s what the microfiche showed when I looked a few days ago but then I have to squeeze the a-arm together to install it. I don’t...
    • IMG_0620.png
  • Nikolai
    Nikolai replied to the thread Nyper build thread.
    Can someone familiar with this chassis tell me which way the sleeves are suppose to face? 1. Or 2.
    • IMG_0606.jpeg
    • IMG_0607.jpeg
  • Nikolai
    Nikolai replied to the thread Nyper build thread.
    I remember the factory harness being fairly light after I gutted it, I’ll weight it tonight.
  • Nikolai
    Nikolai replied to the thread Nyper build thread.
    Got the suspension in and track tensioned. It’s a Polaris series 6 155x2.6 and 8-tooth drivers. I was worried I’d have to trim the...
    • IMG_0438.jpeg
    • IMG_0437.jpeg
    • IMG_0436.jpeg
  • Nikolai
    Nikolai reacted to kinger's post in the thread Nyper build thread with Like Like.
    What are you doing for wiring? I have some ideas for solid state relay and a Amplink PDM if you need some ideas.
  • Nikolai
    Nikolai replied to the thread Nyper build thread.
    I honestly have not put much thought into it. I have the gutted harness from my original sled that was pretty stripped down but it had a...
  • Nikolai
    Nikolai replied to the thread Nyper build thread.
    Installed the drivers tonight. Flipped them around from how I ran them last time so the new side of the teeth would be driving the...
    • IMG_0423.jpeg
    • IMG_0422.jpeg
    • IMG_0417.jpeg
    • IMG_0416.jpeg
    • IMG_0425.png
  • Nikolai
    Nikolai reacted to kinger's post in the thread Nyper build thread with Like Like.
    I tried every cooling option, the u cooler is the lightest. Think about Evan’s waterless coolant, it’s lighter and doesn’t expand like...
Show older items


Back
Top