Recent content by Nodak

Hey guys. I am double checking my timing because I accidentally sound the engine backward a bit. Does all this look right?

Hey guys what size are the bolts that bolt the flex pipe to the head? I need to get some heli coils and I don’t have any bolts to check. From what I can tell they are m8x1.25. Does that sound right?

Can a guy use just regular fuel line from the auto parts store instead of spending 60$ on one hose?

Ok. I can only find one for an srx. I will have to do some more searching. But it looks like that is the tool to have to do it right and make it easy

I made the tool and it works well. I e just been seeing things for a sled pro clutch tool but can’t find one online for a Yamaha 4 stroke

Ok. I just saw the threaded spacers and thought that could throw it off if the were not adjusted properly

Hey guys I have my motor out and will hopefully be putting it back in soon. I assume I then need to get the clutches aligned again. Can anyone point me in the right direction of the correct tool and process of the job. I’ve done some searching and can’t really find the correct tool. It’s on...

Thanks. Felt like it had good compression still after turning the correct way. I imagine it’s not a problem unless it is started and ran after something like that happens? Turning by hand is slow and gentle enough that it can’t really bend anything?

Hey guys. While removing the clutch I wasn’t paying attention and spun the motor backwards. Not much maybe 45 degrees. I’ve heard that’s bad. What are the consequences of doing that? The motor is coming out anyway so what should I look for to make sure nothing got messed up. Thanks guys.

Hi guys. I am pulling the motor on my 05 venture. Do I need to remove the u shaped bar to get the motor out? It looks like that or the water pump need to come off

Would you guys recommend a coolant heater or a stick one block heaters for a rs venture

So what if the flex pipe its self is cracked? How can you weld that but still have it be flexable

Sounds good guys thanks. Where is the best place to source the dounuts

I have an exhaust leak which I am sure is the donuts. How bad am I hurting the engine running it like that? It is very noticeable. And also is it worth the money to do the fix garage fix

Thanks! I really appreciate everyone’s help