Recent content by peclark

Last year was on trail with Viper and got low oil light. Long story short found out the oil filter was not on tight enough and was slowly leaking out. This morning on a trip with the wife her Vector had low oil light and figured out oil filter wasn't on tight enough and was leaking last...

I am just on a trip with the wife up at Grand Marais, Mn. I charged battery before I left, but I am due to replace with new. First morning the Viper cranked slow and not enough juice. So I used my lithium jump starter which was fully charged and it cranked just fine but would not start after...

My wife and I have 2015 Viper LtX DX and 2014 Vector both with 137". We ride trails and aren't real aggressive. I have done a lot of research just still have some questions. Just want to stud for safety in corners, etc. I am pretty much planning on Fast Trac Top Gun studs and their round XL...

Here

Here is ski trace now with more ski pressure.

Old thread I started but thought I would update so might help someone else. So end of last season I had limiter strap to middle hole and front spring preload to minimum and I was still getting tons of push in corners. Beginning this season I added preload to front skis ( can't remember how...

I will try to get some pics in next week.

The lights have a small driver box. I just drilled couple small holes and used zip ties to secure them. Also the lights are 35 watts.

Been researching about headlight replacements and struggled going led or HID. For anyone considering doing upgrade, I got Nineo II H4's off Amazon for $55 and they are just Amazing. The light profile is exactly like the halogens with low and high. It was super easy install with no cutting of...

Yeah, I have been reading about the multi rate springs. Not sure, I think in my 2015 ltx dx the stock is 130lb. Since I already have it set to least preload and my 190lbs not sure of difference, but reading thread on 90/250 lb spring.

Thanks. I guess I didn't realize Viper so much lighter in front. Coming from an older Venture. I am 190 and wasn't getting any sag at all last year so put on barnofparts torsion relocate and have blocks set on hardest and now getting about 2 1/2" and when sitting the arm is about center...

Thanks. I did only make one adjustment at a time testing in last few trips starting with straps all out and and lot of preload on center spring, but so far nothing helps. Never have touched ski springs. For example, here is picture of wife's Vector with the same snow trackers of same day...

I have a 2015 Viper Ltx Dx and been having problems with very little ski pressure and lots of pushing through corners. Just got back from around Duluth, MN and corners were dangerous. I have new kimpex rush skis and put new aggressive snow trackers on Viper and my wifes 2015 Vector 136" with...

Thanks for help. I decided to get a new 2014 Viper LTX (non SE). I didn't really want red color but can't pass up $750o price.

Well you guys have me interested in looking at 2014 Vipers now. It sounds like the ride is better than the Nytro but not the quality control of fit, etc. of a true yamaha.