Srxspec's latest activity
-
Srxspec replied to the thread Ulmer Dyno.Testing to see if this lets you see it... https://www.facebook.com/share/v/17CoHrhAdY/ -
Featured...
-
Srxspec replied to the thread WANT GONE : 16 VIPER 162 mtx Turbo $5500.These still available yet? I have a customer looking for a Viper...
-
Srxspec replied to the thread Apex XTX Engine Noise.I can't tell exactly where that's coming from either. There is a ball bearing on the inside of the PTO shaft as well, it's possible...
-
-
Srxspec replied to the thread Hurricane turbo intake upgrade.https://hurricaneperformance.ca/wp-content/uploads/2018/04/Turbo-Intake-Adaptor-998-Instrucions.pdf This is the instructions and...
-
Srxspec replied to the thread Track question.They are 100% machined versus molded, run truer and are stronger than the OEM Cat ones. If you're going to buy a track, stud it, and...
-
Srxspec replied to the thread Track question.If you're going to do it, do it right and put Avid 2.52 drivers on. The 2.52 track pitch is freer rolling and will run more mph up top...
-
Srxspec replied to the thread Stub shaft hard to get in place!.Heat the block up lightly, it's a tight fit.
-
Srxspec replied to the thread Venture 06 - Not starting + Backfires.When the starter was going bad, the engine "kicked back" while the starter was engaged. Starter spinning one way and engine trying to...
-
Srxspec replied to the thread Venture 06 - Not starting + Backfires.It's possible when it backfired that it sheared the flywheel key and the flywheel has turned on the crankshaft. This would lead to the...
-
Srxspec replied to the thread Redneck dyno!.Views = $$$
-
Srxspec replied to the thread New TAPP Secondary.Tapp items will be here on Monday, hoping to be on the dyno be the end of the week (with hopefully a little cooler weather).
-
Srxspec replied to the thread New TAPP Secondary.I will hopefully have a Tapp primary, 11" secondary and 11.4" secondary soon to try. My plan is to compare them to the OEM Yamaha...
