Recent content by Trevorj

  1. T

    Phazer 2009 no start

    Then you have to solder all those wires together and run them to ground on battery. I ran 3 big groud wires to the battery attaching I think 4 wires from that block to each big ground wire. Let me know
  2. T

    Phazer 2009 no start

    Run a ground wire to the top of that yellow block. See if your fuel pump or starter works. I cut all wires out of that block and ran wires to ground on battery
  3. T

    Phazer 2009 no start

    All fixed up and running. I had to run 3 ground wires from battery to yellow block and cut yellow block out and solder all ground wires to 3 to battery. Must be bad ground location that feeds that yellow block ground. Thanks everyone for the help
  4. T

    Phazer 2009 no start

    Just have to pull plugs now. Turns over. Fuel pump working. Still no start lol. I will pull plugs see if I have spark. I should be a master on these phazer s soon. Lol.
  5. T

    Phazer 2009 no start

    All connectors have a little corrosion. I don't think I would trust it. I will run 2 more solid grounds. To battery. See if she goes. Thanks
  6. T

    Phazer 2009 no start

    So relay good... Put a ground directly to the yellow block. Boom fuel pump lit up. Going to cut out yellow block harness connector. Can I separate some of the grounds. Instead of soldering them all together. Have 2 banks of grounds soldered together.thanks
  7. T

    Phazer 2009 no start

    Thanks mooseman I will try it out.
  8. T

    Phazer 2009 no start

    No codes. I guess I could jump relay. To see if turns on. I will try again tomorrow. Thanks for help
  9. T

    Phazer 2009 no start

    Connected 5&6 to battery. Cranks over now sweet. But still no fuel pump. Does 5&6 control all the grounds now? Or is it possible I'm still missing a ground from the yellow block to the fuel pump relay. Or should I just change fuel pump relay and hope for the best. Is fuel pump relay called fuel...
  10. T

    Phazer 2009 no start

    Thanks mooseman. Do I solder 5&6 together then run a ground to the battery from 5&6. Ya I will have to pick up a schematic. Thanks for your help I will try tonight
  11. T

    Phazer 2009 no start

    Cluster turns on. All fuses good.
  12. T

    Phazer 2009 no start

  13. T

    Phazer 2009 no start

  14. T

    Phazer 2009 no start

    Hi guys new guy here. Have 09 phazer. Won't start. Will not crank over. Turn key on. Fuel pump will not turn on either. I can jump starter solenoid and it cranks. Yellow ground block looks ok but?. Any suggestions. Thanks
See more


Back
Top