Recent content by yaaamaaahaaa3

9200 miles, I plan on checking valves in the off season.The speedo not going past 53 has me wondering if it is not a bearing issue. it still has the wobble bearing.

Can the throttle free play adjustment have any effect on top end?

My 2015 LTX_DX starts normal, idles fine and will accelerate to about 7k rpm and wont climb any further. Feels like something is holding it back, it was a rental sled that I purchased could it be programming ( governor ) in the ECU? It has the 2019 flash. I notice the speedo hangs at 53 but gps...

I recently installed a 137 1.75 backcountry on my 15 ltx dx. Do I need to change the gears or am I OK with stock gears?

Good call, I didnt even think about that, gas mileage has dropped as well.

My 15 Viper is idiling between 1360 to 1610 rpm. I changed plugs and checked coils all are good. The belt was a little tight, removed shims on secondary and deflection is in range. I just put 800 plus miles in the last 2 weekends so new gas. Am I missing something?

No damage done, appears the secondary did bind though. I changed plugs and noticed the center plug was like new, coil was good, appears there is a wire rub on the center coil. Oh fun!

I took the secondary and primary off to clean before my trip last weekend. The machine ran fine but had a loud clicking noise fron the clutch side, belt was squeeling at stops and seemed sluggish over 50-60mph, like something was holding it back. Long story short I got home was in the barn and...

I pulled the trigger on the Attak. I can’t wait to let her rip.

What about an 06 attak?

Thank you I will stay clear. I appreciate the feedback.

I am thinking about trading in my 99 Vmax Deluxe 600 triple with a 2 up seat for an 06 Vector. The vector has 11000 miles on it, the Vmax has lower miles, my wife would like a smoother ride. Are there any issues with that model I need to be aware of and is it worth it. Any comments would be...

My first time ripping into the viper. Does someone have a diagram or picture of how the chain case goes back together? When I drained and removed the cover there were pieces and a spring laying in the bottom(attached to the magnet.) I have a hard time looking at a parts breakdown and figuring...

That makes sense. Thanks for the help. I have a new 137 x1.5 and after seeing the 2 side by side made me wonder if I had the wrong track.

That is what I thought but mine appears to be longer than my buddies 137. Not aaure if you can tell from a photo.