yaaamaaahaaa3
Newbie
- Joined
- Feb 16, 2016
- Messages
- 16
- Reaction score
- 3
- Points
- 803
- Location
- Harrison, OH
- Country
- USA
- Snowmobile
- 15 SR Viper LTX
I took the secondary and primary off to clean before my trip last weekend. The machine ran fine but had a loud clicking noise fron the clutch side, belt was squeeling at stops and seemed sluggish over 50-60mph, like something was holding it back. Long story short I got home was in the barn and saw the secondary collar on the bench, OOPS. My question is did it cause any damage, I rode about 400 miles, I am assuming that was probably the cause for the sled not running right. I have instralled it but planning on heading back up North this weekend and dont want to run into any issues.
yaaamaaahaaa3
Newbie
- Joined
- Feb 16, 2016
- Messages
- 16
- Reaction score
- 3
- Points
- 803
- Location
- Harrison, OH
- Country
- USA
- Snowmobile
- 15 SR Viper LTX
No damage done, appears the secondary did bind though. I changed plugs and noticed the center plug was like new, coil was good, appears there is a wire rub on the center coil. Oh fun!