Search results

I replaced mine with a 12 inch trailer light, flush mount above the flap. Ran wires in a sleeve under the tunnel. The new light is much brighter (in both run and brake mode), and out of the way. I did have to bail on a new rear bumper, however, as it would block my new tail light.

So now where do I find info on the toe-in or toe-out setting for the pilot skis on the Nytro? I was able to measure the angle and it is as neutral (0 angle) as it can be. Where should I set it?

I went with the Slydog Phazer 7 Nytro Mount kit for the Pilot Skis on my Nytro. Snug fit (not tight) and skis rest at proper angle. It was not a perfect fit, but it was 90%.

I have the gas caddies as well, and agree they are hardly noticeable - in fact I like the way they look. I squeezed a tow rope on one side, in addition to the 1.5 gal of gas, and was able to fit my gauntlets in the other side, again, around the 1.5 gal of gas. I have the tank bag up front...

I read in the manual that each time you change the belt, you are supposed to check and confirm the alignment of the new belt in the clutch assembly. There is a way to adjust it. Maybe this has something to do with your issue?

Rock: Sent payment via pay pall this am.

Dumb question but my Nytro came with the left and right tortion springs at different settings. Shouldn't these be the same? Also, I've read a lot about the Front Limiter strap needing adjusting, I did bring mine down one slot, but shouldn't all these references be to the Front Limiter Straps...

What are scratchers? I rode today another 50 miles with it, every time we hit hard packed ice, I could smell the track, hyfax (or belt?) burning. I have studs on the track, and I'm wondering if this is part of the issue. I had my dealer put the studs in, he put a ton, four rows worth. The...

Dry conditions - cold ice packed snow. Track setting was factory - I have not messed with it. I had around an inch of deflection after the issue..during the issue, it seemed like there was no deflection.

All - I have an 09 Nytro SE, 400 miles. Left it out in the cold last night (around 1 degree), started it, warmed it up and ran easy for around 5 miles, when my belt started burning. I stopped on the trail, checked everything out, and the track was bound tight. I restarted and could not move...

Holly mother..... I was looking for a thread to make the identical comment! Just got back from popping the cherry on my 2009 Nytro SE, (40 miles in NH) and all I can say is "Holly Crap"! I can not believe the power and torque. I'm going to hurt myself on this thing! I did try showing off...

Sorry to get back to you so late...I made a custom mount for the 276c, using the slip on portion of the supplied mount only. I cut one side off of a 3inch alum square tube (making it "c" shaped), mounted this to the center of the handlebars (fit perfectly), and mounted the top portion of the...

Same MA, Boosebuck it does! It does have a memory card for downloading trail maps, and saving tracks.

My Garmin 276C hard mounted and wired to a 2009 Nyto[/img]