Search results

I see these was a thread a while back on some of you who used these. Just wondering how they have been. I am on my second set of y-pipes. I am pondering either new OEM version or the stainless ones offered aftemarket, although arent the new OEM version now stainless to? My gaskets weathered the...

So I have read this from top to bottom, I have already replaced the donuts once before using OEM stuff about 2 years ago. My questions is, are the new part number (99999-03989) better than original ones, or should I order soem from Sledtoyz or others? thanks Jim

I need all 3 axle wheels and thought I had the solution until I found out I need the 6004 bearing instead of the 6204, Yamaha is out of stock on EOM ones and I can't find anything aftermarket. I am not spending $90 on the billet ones from accessory catalog. We are leaving for big ride 2/20 so my...

All you need is a 14mm socket and wrench and you can do all your smaller wheels in under an hour, its really easy and you can't install them wrong. The axle wheels are easier if you take the skid frame out which isn't hard either it just takes a bit of knowhow.

What did you find out, my throttle is sticking the same way and throws the code. TPS sensor is fine, cable is fine, butterflys close perfect. throttle lever is adjsuted to spec. It seems to be in the linkage where the cable attaches to throttle body.

Don't feel bad, I am right in the middle of replacing all small idlers with Yamaha ACCESSORIES OUT OF THE CATALOG, the only color available is red, all other on backorder, I lost 2 of my rear axle wheels on last ride, I am repalcing those with Kimpex aluminum ones with replacable 6204 bearings...

The sub lead works mint, just ran my RTX and could only have warmers on 2nd bar, the kit retails for 29.95 so your dealer is stroking you, and that includes the 07 bars!!!

I have an 06 RTX that does the exact same thing, I have the cables adjusted perfect. When you let off on throttle or blip throttle it seems that if the throttle itself closes before the throttle bodies is when the TORS acts up, I lubed the spring and it did not make a difference. Can the return...

Thanks, I am on my way to get plugs, hopefully soemwhere up here in Mercer WI soembody will have those CR9 plugs. It sputters still, I am thinking plugs also, I did disconnect TORTS and same thing. Are they a pain to change?

I have been having trouble with the TORS switch, could it be stuck? Manual tells me to disconnect to get running, I am working on that now. Code 84 has come up numerous times while riding. All it does is sputter when cranking over. I started it last night for first time since November and it...

no risers, no gauntlets, maybe it is just a cable adjustment Any other ideas?

I have read tons of threads on this that have been very helpful, buuut at still very confused, the code 84 comes up and renders the sled inoperable, besides the obvious cable adjustment, what else can be done? Can this be disconnected without any other issues? Frustrated........ Jim

Found it, thanks, It worked and all codes have bene cleared. SO do you think I will have troubles again with the TORS? Or is thsi one of those pesty problems, now that I know how to clear codes I can do that on the trail, or shoudl I replace/and or disconnect TORS?

I have the manual but there is no page 600, it only goes to 486. Covers Apex/Attack 2006 - 2008 Can't fidn it

How do I clear the codes?

Thats exactly what I was looking for, here is what I found. 11,22,81, 84 84 is the TORS and thats the only one that UNABLES the sled which is what it did, shoudl I just disconnect like I have on all my other Yammy's?

I found out how to get diagnosis started on gauge, BUUUUT can I get it to show what codes have come up prior? I started looking through all the threads and got dizzy !! My 06 RTX woudl go into limp mode when running, at first th temp light came on with check engine light so thats what I am...

I just installed updated harness only and HOLY CRAP, do the warmers get hot at idle on level 2, I think I solved a HUGE issue, can't wait!! LET IT SNOW, LET IT SNOW, LET IT SNOW!!!

I am working on it right now and I can't get anything to happen, when I do what you say all that changes is the clock reset..................hmmmmm HELP !!!

Thanks 1crazy, thats exactly what I was looking for.