Search results

u need to install an xtx driver to get speed out of sled but it will also put your speedo out as well I have tried a lot of different gearing with little change

just upgraded nytro from 240 to 270 low altitude sled runs perfect . at altitude sled has bad bog at low power settings at full climbimg sled runns perfect as soon as you come off of power bog until you power up.in revy now need help

sell your turbo kit for your 2 stroke and buy the right kit and you will have the right parts that fit.

found problem bad map sensor, change guage have to turn the boost up

I do have there new kit easy to install like the tunnel dump and air box better than my mcx kit

I have the rod holding the waste gate open already should i go more

installed new mpi turbo kit thought I had it dialed in and know I can not get the boost under 7lbs and I live at 1000ft. Waste gate is held open before boost comes in and tried adjust bov to no avail. mabe need more clutching? gear 22/40 primary b/w/b 8fs loaded with 17.2, secondary 45 helix...

the kit is mcx spring bl/w /bl 8bu weights loaded secondary pink with 45 degree helix running pretty good no long pulls yet to check clutch heat.

I just got my new ce 2.5 track today

Thanks for the info I will be testing 8bu loaded bl-w-bl spring

I can access yamaha parts for cost

Can anyone help me clutch and gear 2010 nytro mtx with a 180 mcx kit Live at 1000 ft but make couple trips to golden per year 6000+ clutching as well thanks for your help[/list]

I am a small dealer with small overhead, mtx 153 is around 14k and 162 is14400.