Search results

Rode my RTX Nytro 700 miles w/many adjustments to spring tension, and limiter straps. I could not keep the skis on the ground, corners were exciting! Removed factory weight transfer blocks and replaced with blocks of Polaris Edge. The black blocks bolt on w/yamaha bolt, and allow for 3/4"...

I would be interested in how the longer stud performs, i have 3000 miles on the Attak, and 4000 on the Rage, and have had no pulltroughs yet. We do our best not to spin the track on non snow surfaces. I run the stock ski's with Stud Boy 9" shaper bars. The stud and carbide combination...

I ran 1.325, 189 Woodys Gold Diggers with Doubles in one row, and 3 singles in next on a 136" track, all inside the rails last year. this year i am going to change to 216 total with doubles inside rails, and 4 singles 2 inside, and 2 outside. i know the outside is subject to pulling...

I used 1.325 Woodys Gold Digger's with the 144 pattern on my Rage for 2005(total 162 studs), two inside every row, and two outside every other row. The sled hooked up very well, and i did not pull through any studs after 2500 UP trail miles. For 2006 i am going to stud an Attak, but i think...