Search results

How were the snow conditions? Did you ride very long in low snow?

Culvert - Thanks, I did not know those hoops moved, I thought they hold the springs from popping off. Yes I will use this method. Thanks again. This site is great

Dropped the skid to do some work and now I am trying to figure out what is the easiest way to get the bolts back in the drop bracket. I can do it compressing the middle shock with a clamp, but I would like to know how it is done without having to resort to long bar clamps, incase I need to move...

Stiff - You are the MAN, thanks!

It is see "RX/RS MTN How to? Tech and Mods." It is the second one listed......although not obvious.

Aaron - Did you ever get that bag done? Do you have any pics of it installed. Any heat issues with the under tunnel exhaust heating up the sheet metal while you are idling?

AaronBND - I like what you did with the seat bracket. Did you use angle stock and bolts or did you weld it? Any chance you could post some more detailed pics. Also it looks like you don't have a heat exchanger riveted to the back, did you just run a straight pipe connecting the tubes?

Lincoln, What is the distance you recommend drilling the hole above the stock hole? I know too much and my under tunnel exhaust will take a beating, too little and I won't get the benefits.

Very nice, looks factory. You might want to make sure you have a cover for it if you are leaving it out somewhere over night unattended.

He had to call someone who he sells them to. They are hard to get. Alpine Motor sold their last one Tuesday morning, a couple of hours before I called, they are now waiting for more. Wildchild said that it will be a couple of weeks before he makes another batch. He is really busy, I have...

Wildchild found one for me. Thanks to all for your help.

Joel, That is Awesome. Thanks for taking the time to put it together and posting it. I actually caught myself leaning while watching....we gotta get some snow.......

not for a couple of weeks

2strokes, thanks. They don't answer, they should be open, any idea of anyone else?

I need a wildchild rider forward setup. Kurt is trying to find someone that has one laying around. He is not making another batch for a couple of weeks, I need one sooner. If you have one please let me know. I can't weld like Kachess can. YaMon

Mark, Thanks for the reply. Hope the Vector ran like you expected. I am waiting for my Hartman Extension to arrive, I will see if I can make the brackets work, although MPI told me not to drill any additional holes. I was hoping that the brackets upper holes would be higher than stock so...

but is the tubing enough surface area to effectively disperse the heat?

Kachess, I would like to leave some room the problem is that the header pipe is starting out too high. It is just low enough to get the glass pack on. I saw your instructions and that is what gave me the confidence that it could be done, awesome write up. thanks for taking the time to do it.

I had the same rivet for the heat sheild, I drilled it out cause it was too tight but now I'm thinking that might help.

Thanks Trxster, mine is also a straight flow through, Pro-Flo can see right through, hope it is not too loud. I will be leaving the heat shields in place also. Does yours thump at all?