Search results

Not so much

I would be down for 1 of the short sleeve pocket tees but I think those are only on the website, actually was looking at the performance tees (non-cotton).

Thanks for adding the pocket T Tom.. ordered --- attempted. Shopping cart will not process without a shipping method but it never asks for a shipping method. I already posted the question to the website.

Thats the way they always worked, basically, thats how all electronic power steering works. The EPS doesn't need to talk to the ECU, it just needs to receive the canbus messages for speed which are on the canbus wire pair.

Agreed (says the guy with an SRX)

It looks to me like the SRX is an exclusive model, 998 made. Lots of people aren't going to get one.

not a fan of the teal highlights but I like the graphics other than color on the LTX

new riser

ok, corrected to 600-750f, but it still all depends on just how hot the exhaust gets at that position. If the exhaust is only 500 may be okay, but if its hotter, don't bother.

The feedback I have seen on smart shocks has been good now that it is properly flashed. John at Accelerated Tech also has a custom flash for the SS setup that improves the one area of negative feedback which is that the firm was too firm. Its interesting that Polaris is pushing the 'IMU'...

It just depends on how hot that particular section gets. All of the silicons give up around 6-700f and repeated exposure.

That permatex sealer @ 2000f is the highest I have seen next to some of the fireplace sealants (2500f). The JB Weld High Heat is water soluble, the other kaolin based JB Weld products are not but rated to less heat.

Almost everything expands faster than titanium

https://www.permatex.com/products/specialized-maintenance-repair/exhaust-repair/permatex-muffler-tailpipe-sealer/ It is kaolin based which is a silica based clay material. Similar to JB Weld exhaust products. No experience using it but I have seen very little that is rated above that 700f rating.

Traditional epoxies won't work, even the high temp ones. The silicon based sealants, clay based (JB Weld), or there are some fireplace sealants that might work, none of which are epoxies.

That outside pass was sick. Wsbk is going to be really good. Can’t wait for MotoGP to start.

Love it! Supersport race streamed on youtube today, I don't watch supersport much but was super impressed by 16 year old, 4th place finisher Kayla Yaakov. The guy that one first has actually raced motogp. Props for the Hayden hat as well. Young lady has over 400 race wins in her career...

You want their carbide. One of the functions of the snowtracker is the deep keel on the carbide. It acts as primary directional stability and works with the correctors to eliminate darting. It will also outlast most carbides.

The carbides that come with them. There are two elements, the corrector plate and the carbide. You need both.

I can grab my buddies XT-P 1000, its on the list. Problem is, if I like it --- another 20K ziinnnnggg out the door.