Search results

I think I will get an AEM module in that case. Mine is an ECUMASTER

Bringing this the top as I think my module is bad. SO you just purchased this one and everything worked fine after swapping the ends? This seems like a much cheaper replacement if that's the case!

I have the ECU master as well. What 02 sensor did you end up getting?

And you werent getting any codes? I'm wondering if that's what's happening, its a bad 02. I dont have the AEM module.

It should throw a code if the 02 is bad and then the tune will default to the base tune so MaxSpool 17 in my case. I dont think it could ever lean out totally.

TD max spool 17, BOV, 3 bar, CAI, 2.5” mod stock muffler. 1.5” track with 96 studs. Prior to this was running MS16 with stock muffler. As mentioned , I ride with a buddy with exact same engine mods and track, but he has maxspool 17 without closed loop. He gets noticeably better fuel mileage

Ok will have to check hour meter since I don’t have dash flash. Although I thought hour meter displayed boost?

Anybody have poor fuel mileage going to closed loop? Mine is noticeably worse than before and even compared to other sleds with similar setup and riders (but not closed loop). Over a 5 litres difference on fill-ups. Sled runs well, lots of power. I DONT have an AFR gauge to confirm ratio. Temps...

Hands down the best money I spent on my sled has been the power steering or upgrading suspension. (I also have MS17, closed loop, 3 bar, CAI etc). What's the point of more power if it steers heavy or doesnt handle well. My old sled feels like a new sled now. The EPS also gets rid of ANY...

Finally got out to ride my 2019 after doing the conversion. It's the best money I have spent on my sled (besides the QS3R upgrades)! I tapped into the CANBUS harness and the EPS works fine, zero issues. I personally love the feel of the earlier model spindles and adding EPS, I feel I have the...

Just buy direct from TAPP. They have dealers all over the place or I'm sure will ship directly from them. That's all AK is doing, he is buying in bulk from TAPP then up-charging for his grease.

It’s about $1600 USD if you need a new wiring harness (I would says it’s required for older than 2019). 2019 and newer it’s about $1100 usd from partzilla if you source connectors and splice into factory harness which is what I did. The parts are probably more expensive from other dealers. I...

You want a quiet clutch? Get a TEAM, ADAPT or PB80....Despite internet folklore, I've had zero issues with my TEAM. Yet had issues with a sidewinder clutch (and had to deal with the annoying sound to top it off). All clutches have some flaws in my opinion. Pick your poison.

I watched your video as well, doesnt sound like the normal yamaha clutch rattle, sounds like something else is wrong with the clutch....

Yeah something is weird with their numbers. The 900xrs also had smart shocks too. So a 23 850 XRS with smart shocks is 21lbs heavier than a 24 900R?! Is Gen5 that much lighter? Notice they didn’t have a winder this year. Would have also liked to see a lynx weight.

Any Tapp dealer will see this. Turbo Dynamics being the one that I would imagine have a lot of locations in the US OR will ship to the US.

Yeah the eBay kit is the copycat kit. He took out the Tapp name and put his own grease in it, resellls it for more. And Daves post got deleted because guess who the admin is of Sidewinder Tech on FACEBOOK? The guy selling the kit . I agree on the ‘dumbness’ of some of the posts there and other...

I see Dave from Tapp is not too happy about the copycat kit….

The CANBUS Connector has 8 terminals, but only 3 are used. That's why you need to refer to the wiring diagram to know WHICH ones to wire up. I believe Earthling or TCat100 may have posted that diagram, or you can get it from the CAT site. You need to source the connectors and also the wire leads...

This is what the factory EPS looks like installed. You will notice the power lead I installed with 30amp inline fuse. Also the factory wiring harness that was meant for ATAC was used for the CANBUS communication . I also just tested in garage after install: it works and no codes! I have a 2019...