Search results

How much will the shipping be to Norway for a couple og hats? :)

Hi guys! I`m about to finish up my yearly preseason check-up and having heard of the bad OEM exhaust donuts I wonder how big a risk it is to run the stock ones? If they start to leak, wount I hear it?? I already had the tank off to change sparkplugs and inspect turbo/hoses etc. and now...

Hi there! sgilbert: I kind of agree but on the other side I hate replacing parts that are OK. The chain should last atleast twice or triple the milage it already has. They use the same chain on bikes and I doubt that this engine will ever reach the same milage as a bike. Has anyone every...

Hi ! Grizztracks, it only has a singe I, it looks like this: I I--I I havent installed a headshim, he is running the 180kit on the sled. The engine had 12.000kms on the clocks before tear down. So basically it has some milage but when thinking of the fact that these chains last...

Just look at the photos, you can see the marks, there is a line on both sides of the sprockets, these are suppost to be flush with the head (where the head cover rests). You can also see the mark on the flywheel that the notch in the stator cover is suppost to be pointing at. (in the photo...

Hi there! There are no paint marks on chain/gears. Manual sais: -Put cams into head -Install chain firstly on the intake sprocket and make sure it is tight from the crank and up to the sprocket -Install chain on exhaust sprocket -Install camshaft caps and tighten down evenly...

I`ve also wondered about this.. . I`m thinking like, since this sled already have a fair amount of weight in the front it wount be better to get even more? I`m still running the stock upper hole.

Hi guys! Today I went in the garage to time the Nytro engine. I found the best way was to do it as per manual. Today things went better, (for some reason?). But, no matter what I do I cannot get all the marks to line up 100% perfectly. When I line up the mark on the flywheel...

Thanks for replying grizz! Yeah I thought of that but then I have to force both of the cams into position before putting the chain on. Well actually I guess that shouldnt really be a problem, it will probably be easier then putting the camshaft caps on/off 10times to get it right. Good idea...

Hi guys! Today I installed the head on Dimebags engine and put the cams in and tried to set the timing correct. According to manual you first put the chain on the intake cam making sure that there is no slack on the chain and then put it over the exhaust cam. You then install the camshaft...

Yo! Today I installed: -Lower crankcase -Oilpump -Oil pan -Cam chain guides -Flywheel and stator cover I removed the stator from the cover cause I could see some bearing metal behind the stator so I figured it was best to remove it to get it thorougly cleaned. Tomorrow the...

Thanks Dime! :) Today I went back in the garage to assemble some more. (Sorry for working without you Dime, let me know if it`s not allright). I removed the old oil cooler and ble through all the oil lines in crankcase. Behind the oilcooler there was spot were bearing metal had gathered so...

X3 , cases must be split. Here is a picture of Dimebags noise-maker. The "wet" bearing isnt pictured here but you can see where it goes. I changed these bearings on Dimebags engine. I would do some research before putting Loctite on the spline, make sure that it will stay there and...

Hi ! mike3577, yes I guess but since the manual sais to check clearances with plastigauge I guess there is a reason for it. ? Today I went in the garage and checked all rod bearings, 0,035 , 0,040 and 0,040. So all checked out OK. One thing I noticed whilst installing the rod bearings...

Anyone? :) This morning when I was lying in bed I started wondering wether an option could be to swap J4 with J1 since J4 had the least clearance of them all and J1 had the most?

Hi guys! Been a while since the last update here, we suddenly got alot to do at work so I havent had time to work on the engine. Dimebag is currently enjoying a visit across the pond so I am basically working without a permit cause I know he really wants to take part in the rebuild...

Congratulations! The oil residue can also come from the airbox, if you roll the sled over or let it lay on its side, there will come some oil out of airbox, the airbox has a crank ventilation hose inside it. If you dont rollover often or do alot of boondocking you will be fine, if you...

Does anyone know if using a lightweight or smaller battery can affect some of the other electric stuff on the sled? Reduce lifetime of stator ? Just curious

Hi ! Does anyone the measurement for the prefilter used on the MCX kits? I did get a new one from Marklund last season but they doesnt seem to last that long, I have seen someone using Outerwears prefilter and I imagine that these prefilter are of better quality then the unknown-brand that...

I must say that the chain skipping issue sounds scary, it`s just like theres a 50/50 chance that you will ruin your rebuilt engine on the first startup.. how can this be?? Following the service manual normally always keeps you on the safe side but there`s clearly a first time for everything...