Search results

You don't see a lot of youtubers in the US/Canada on 4-stroke MTX's. It's way more popular here in Scandinavia. We don't get as much snow as you do, but on this side of the lake we would be happy to get stuck. I think most would pick a 2-stroke over an XTX for off-trail. But personally I...

I've ordered a Lazer Linear 6 Elite (500 gr), it has 4050lm and the spread/range ratio is good, not too focused. The OEM is too weak for me! I plan to mod this sled as far as I can afford, I already made a list of things I want to change :sled2:

People have been asking how to do a headlight delete on a Sidewinder/Viper. Here's how I did mine recently. This one has a 270 kit with cold air intake. It should be possible for stock ones too. I've made a similar solution on a Viper with the same kit. I took the hood off, then...

After design is complete I will install it on my Sidewinder.

Lynx Radien magnet goggles. Never an issue with fog.

Thanks! Looks like I need to drill a ~30mm hole, or just make a smaller extended circle.

Anyone who have installed ascender covers on their Sidewinders? I recently had an Alpha and really liked the narrow chassis, great for sidehilling/carving through the snow. I'm considering swapping out the covers, only thing holding me back is the gorgeous look of the Sidewinder.

Are you sure the battery is good? Try giving him a boost

Can't really tell from the angle. Could you measure the distance viewed from the side? That would be really helpful

Would like to drill a circular hole so it looks more OEM. Where would you put the centre of a hole saw?

I'm installing vertical steering on my SW and need a template for cutting the plastics in front of the gas tank. I bought this used and can't find instructions anywhere.

Over-filling the oil tank can lead to oil seeping out the seals on the turbo, due to high pressure. I'd say drain it and refer to the manual on how to properly read oil level. (Engine at operating temp, measure at a set amount of time after shutting the engine).

Swapped to a Skinz mid-rise seat, and installed knee pads. :cool:

Had my friends '06 Doo in the garage. I pulled the motor out, and tore it to molecules. It needed its crankshaft bearings re-greased at 6000kms. I thought about all the gaskets and bearings and expensive tubes of grease I needed to order. The pistons were bad after a swap 1300kms ago. I got...

Nice build! I did a wrap on a Viper, was pretty easy and the result was good. I used Deviant Ink, you get to design and change colors with an illustration of your sled. They give great instructions. I had 2 curves which were pretty hard, other than that it was pretty easy with the right technique.

https://totallyamaha.com/snowmobiles/aaTECH/Jackshaftreplace/Jackshaftchange.htm Hope this guide helps. Friend of mine recently did some similar work. The nut had come off and spun the threads off the collar. I can ask him what he chose to do.

Really like the stickers this year lol

Finally made the swap! '23 SW MT-X LE 153. 270hp, shorty, +protection here and there from the shop. What a beauty.

Remember to use studded tyres in the winter!