Search results

Can't help on the cover, I googled with no success. Maybe a dealer or the place you plan to order from can help? Another option is the vinyl dye, lots of guys in the Apex forum used that to dye the side stripes. But if you are trying to get rid of the khaki color on the top of the seat, not...

I made it to about step 9 in 40 minutes. As is typical I doused the garage with gas, should have siphoned some off. I ordered part number 5 in the attached image. What keeps the system from leaking where the 2 pipes go to 1?

So is this pop on decelleration causing damage, or just an annoyance? I just did a quick test, a towel folded in quarters with a gloved hand over the exhaust. Held it for 12-13 seconds, engine dropped some rpm, but stayed running until my hand was too hot to hold. Problem is It will be a...

I'd think 5 grand, but that is dependent on a lot of factors: Is it set up right? When buying something with mods, I want it to have enough miles to be set up right and running well, but not so many that it's wore out. Geography, general condition of the sled, etc. You can find stock...

Nice write up, thank you. Need to get mine inspected soon, I'm getting a good pop on decelleration after 3/4-full throttle bursts. Any way to check without tearing it all down? Seems I remember reading apex owners knew the donuts were shot if the sled ran with a rag stuffed in the exhaust...

Silly question here guys. If I leave the key in the on position, should that discharge and kill the battery or do I have a different issue? Somehow yesterday I left the key on, and now the battery is totally dead. Just a coincidence that I had planned to charge it tonight anyway to get ready for...

Figured it out, I had forgotten to load it by twisting the helix before reassembling. It ran fine on the stand, but not under load. Put it together and now it is probably a bit high, need to run it on snow again before deciding if I will put one of the shims back in. Rookie mistake, just...

Here is the snowflap. I'm happy with it, not perfect but it passes the 5 foot test.

Since my last post I found the handguard mirrors I wanted. I also picked up a "total" cover for it, haven't tested the fitment yet. I also decided to paint the snowflap. Have a bit more to do on it and then I will post pics!

As part of my prepping the Phazer I just picked up I Installed a brand new belt and set out to adjust the belt height in the secondary. If I pull both shims out, the belt still rides slightly below the top edge of the secondary. With them in, it is lower still. Is there any additional...

I'm not sure if it counts as an over the summer mod now,but here is what I've done: 1. Bought the phazer in this thread from zr8000 2. Installed black slides 3. Installed windshield bag 4. Installed tether 5. Installed accessory outlet 4. Installed ulmers clutch kit 5. Silver star...

I just picked up a clutch alignment tool, offset is spot on. Center to center is about 1/16th of an inch too close to each other. I'm thinking that is close enough, but if I want it perfect how do I adjust?