Search results

Yep rode three days on it last weekend. I have to remove my roll over valve just before the trip as it was cutting power to the sled at higher RPMs. I'm not sure as to what is happening with that. Otherwise the only other issue I had was regulating the amount of boost. I just ordered a new...

Headed to Munising next weekend then Steamboat in March.

Here's a few pics from the end of last year. I have some hull modifications as well as adapting the turbo from my sled build over in store this year. Excited to get it out of storage and start to work on it.

Here is the final pics of it ready for the season.

Kinger I know we talked last year about a tunnel. Take a look at my thread we could do something similar to that.

Wow awesome work

Another Update:

Thanks guys!, Nikolai I cannot thank you enough for your build thread it has helped me very much along the way.

Small Update:

The front cooler had to be moved forward to clear the bigger lug track. I was able to remove it from the sled by using a 90 degree air grinder to grind off the rivets from the inside and cutting the lower right coolant tube off. It was a good thing I had to do this because after welding the...

Lots of cool projects going on so I figured I would update as well. I made the mistake of going west last year, so I am changing the nytro up again. '13 AC 153" Float Skid Turbo Mountiantech Aarms Tunnel Cooler New Tunnel etc. Tunnel Cooler After Blasting before powder coat Fresh...

BOOM nice work

The ditch got real wide and thin in that spot, made it pretty far until the pump had no water to suck. Had to tie a rope around my waist while my copilot pushed to get it to a deeper section to get back on plane.

It is a ridiculous amount of fun! Dare i say as much fun as snowmobiling?!

Things got a little skinny here in southern MN last night.

Northern MN. Not trying to broadcast it on the net where. Probably 6 hrs from you ha. We need to get together here and run in IA somewhere.

https://www.youtube.com/watch?v=apwDePeOsz0&feature=youtu.be Here is the latest from this past weekend. I will post part 2 tomorrow.

I have thought about putting together a builder kit if anyone is interested or supplying a bare hull.

Thanks guys. Got the hook pressed out this weekend she planes out much nicer now.