Search results

i have just finished my 121to144 extension is there a different set-up i should now be using for the rear mono set--up i have the heavy spring done as well as the revalve from pioneer any help would be appreciated thanks

hi guys i`am looking for an exact measurement for the brackets that hold the small wheels and the axle they are mounted on at the rear of the tunnel on ltx models the axle or shaft that holds these small wheels are actually mounted to the tunnel itself not the skid.i`am installing an extension...

i`am going from 121 to 144 this summer with an extension kit from oft got the rail extensions on they look like a work of art , what do you guys think of putting an extra set of wheels on the extension itself it looks like a long section of rail there with no wheels ,i was thinking of useing a...

anyone know if its business as usual for oft,ordered some parts sent a couple e-mails never got any responce ? whats up

when going from 121 to 144 will i have to move the small heat exchanger which replaced the crossover tube from its factory location to the rear of the new tunnel extension?

going from 121 to 144 on an 06 apex rtx whats the track to choose an ice attack or an ice ripper any one have any info? i think one of them is availible with a 1.375 lug is there room to run this without modifying anything?

i think i made up my mind to go from a 121 to a 144 on my rtx i`am leaning toward oft racing or muffin works for the kit any input would be appreciated one other question is about tracks i `am thinking an ice ripper or an ice attack i like the pre studded thing should be some what lighter then...

i have an 06 rtx 121 would like some thoughts on going longer 136 or 144 anyone have any input on the subject, is there one extension kit better then the rest seeing how it done everything but snow this winter i`am thinking may as well put a little more money in the old girl hopefully make it a...

just had my primary clutch off, apart and cleaned it was very dirty have a couple questions what do i retorque primary clutch bolt too and is there any service or cleaning i can do to the secondary if so are there any write ups or instructions on here i can use i have never had my secondary...

i have a set of side kicks but cannot find a good location for mounting thinking of trying them on front a arms some where anyone have any ideas or pic of good locations? my sled is a 121"there does not seem to be much room on the skid i wuold like to get them as far forward as possible thanks.

i`ve done a search and i think i found everything but what i was looking for on an 06 apex rtx with a factory track what stud length and no. of is everyone going with i think the factory track is an 1.25 lug. thanks

a friend of mine has a set of wind deflectors on his apex they look like yamaha pieces but i can`t find them on the yamaha site up here, any body have a part no. for a red or black kit from yamaha or a location where i can look them up? thanks

after swapping speedo screens no change so we tryed his ohlins shock on my sled and it worked perfectly so we then swapped computers from my sled to his and that was it everything works as it is suppose to finally.so he will take my computer and since my rear shock is the remote adjust in the...

if i remember correctly there was a guy giving away the starter saver lights if you payed for the shipping is that still happening or did i miss the boat if i`am to late anyone know where to get one or how to build one thanks

this is a stupid question but the yamaha spoked idlers do they get installed with the snap ring on the inside or outside i am putting them on a set of pioneer drop mounts and they seem to rub on the mount when installed with the snap ring on the outside ?? thanks.

i checked for resistance though to shock solenoid and it came up 4.6 for a factory spec. of 4.1to5.1 so that looks right ,i checked the harness as far as i could with the gas tank off can not find any issues there,the speedo screen still will not bring up the shock symbol. when i replaced the...

a friend of mine bought an 08 ltx gt 40th anniversery sled with very low km. but the harness for the rear shock was torn off so he replaced it with a new one but still can`t get the shock symbol to appear on the speedo screen we checked the ressistance though the shock servo it comes up at 4.6...

i`am replacing the speedo. bearing on the front drive shaft but the new bearing had no set screws included with it is this right? i can`t seem to break the old one`s free i tryed spraying with penetrating lube and will let sit a while ,i `ve been trying to find set screws but am having trouble...

what do you guys suggest ski mounted or rail mounted, spring type or cable type kind of leaning toward cable type just because if you forget and reverse no big deal. thanks

anyone know where the best place to buy a good quality set of ski scratchers would be , that seems to be the best placement for getting the best coverage of the entire skid. thanks