Search results

Hey guys i found a 2008 Nytro mtx shaft with 2 extrovert drivers with 7 teeth on it and was wondering if they would fit on my 2003 RX1 ? They are aproximatly 6 inch in diameter !

The only thing from what i can read some people seems to find that the challenger dont have much grip taking off but ive been reading a lot on those two tracks but the more i read the more i am confused... Maybe someone could tell me from experience wich thet prefer and why !!!

My friend has a intense and its by far the best track i ever tried, the only thing that kills me is they dont make it for my 151 skid...

Yes i did it is now located over the coolant tank, i just dont want to take any chance for 40$ !

The next best thing to do after installing a apex seat !!! I bought te 5'' powermadd riser and 05 mountain throttle cable and removed the parking rale cable now the only thing is the brake hose that is quite streched so i ordered one from a 05 rx mountain and see if that will help !

Hey guys ! So my sled is in deep need of traction, it just wont take off and keep spinning. I have a 2003 RX1 with a 151 skid from a 05 moutain. I just cant make my mind on wich track would be better for my sled i ride 50/50 and will install 8 theet extroverts !!! Thanks for any input !!!

Perfect that is what i wanted to hear ! Thanks !

Hi ! i am looking to buy a gift to my sled and i ! Handle bar riser, how high can i go without replacing anything else but the throttle cable ? The Yamaha dealer told me i should not have any problem with a powermadd 5" riser and a rx moutain throttle cable... is that correct ? :letsnow:

Il check it out, thanks man ! .... would anyone have picture of their 05 RX moutain where you can see the front and rear mounting bolts ?

Hey guys, i am converting my RX1 121'' to a 151'' from a 05 RX moutain, i looked everywhere and cant find what i am looking for, i would like to find the measurement from the '' driveshaft'' to the cross tube where the front mounting bolt goes in and from the tunnel top to that same tube. Also...

Nice !!! How was yours cranked up to ?

Its the clutch rattling like they all do and i hate it lol. I wonder how high i could crank the idle without hurting anything ? Even mod the clutch somehow to stop it from rattling...

Ok can someone tell me or send me a link about good clutching info... What does thightning or loosening your spring in the secondary clutch does ? What does adding or loosing weight in your primary clutch does ? I just installed a 151'' suspension on my RX1 that was born a 121'' and want to make...

Hey guys, i brought my idle up to about 1600 so that the rattling clutch sound quiets down a little, does this hurt anything ?

Hey ! i am looking at installing a 05 rx1 mtn skid under my stock 03 rx1. Do you guys like that suspension ? anyone did this that would have some measurment for me ?

Bump up !

Myself i like the ZR1 with his 638 hp Supercharged 6.2L LS9 V8 engine from factory :D

Thanks man ! it probably still will be better than my stock 121 suspension... i hope hehe ! There is gotta be someone else with this set up that could give me some feedback !

Bump to top !

Hey ! i have a stock 2003 RX1, i am looking at putting in a 151 skid from a 05 RX1, would this be a good improvment, anybody did this before ? how hard would the install be ? Thanks ! :letsnow: