Search results

I called Hauck and they have done the clutch alignment, ski alignment, track alignment. They also shortened the intake spacers and did all of the general stuff that has been talked about in the what to watch out for on sidewinders section in this forum. Their Tech suggested to let the sled idle...

What are the intake spacers? I bought the sled from Hauck Powersports and all the mods the previous owner had done was done by them. Had the DMC gear put in, tensioner bolts welded, track aligned, metal blow off valve installed and they checked the clutch offset.

thanks for the info, I will check it out.

I got a smoking deal on a 2021 SRX with Hauck 240 HP tune and clutch kit. I upgraded it with metal blow off valve and a new Camso Ice Arrowhead 130 track. What pro's and con's should I expect from it? Any specific things to watch for? It has 3,250 miles on it.

New track, studs, drive shaft bearings, chain case oil, idler wheel bearings, carbides and cooper exhaust donuts (modified exhaust clamps for tighter clamping pressure) in the last 900 miles. Had Fabtec (local and trusted fabrication/welding shop) go through rear skid frame and reweld joints and...

Thanks for the pic. How well has the 12 gal. tank worked for you? I bought my sled with it already installed so I don't know much about them. Did you reuse the fuel pump/sending unit from the stock tank? Also, I read that the bolts holding the pump/sending unit in the larger tank have to be...

Do you have any pictures of this on your seld? this is a marketing picture that I find anytime I look for Atach saddle bags.

Looks a bit bulky but if that is all that is available, I might have to try it. Is this the Cat Attaché bag and mounting system?

I just purchased a 2021 SRX that has the 12 gallon tank and the stock tunnel bag will not fit with the added capacity tank. Does anybody know of a tunnel bag that will fit with the bigger tank?

Just purchased a 2021 SRX with the 11.5 gallon oversized fuel tank. The stock tunnel bag does not fit with the oversized tank. Does anyone know of a tunnel bag that works with these tanks? I searched T.Y. and did not come up with anything.

tha Thanks for the info.

I looked over both my Viper and Apex Yuasa batteries and do not see AGM printed on or molded into either one. Because of this I have always used the "Standard" setting on my charger instead of the "AGM" setting to charge them. Would that have affected them in any way? What is the difference in...

Just had to replace the Yuasa battery in my Apex also. It was shorted somewhere and would not take a charge. Going with the AGM battery in it as well. I know the Apex has parasitic drain so I either have it on a tender during the riding season or take it out during summer months. I usually start...

I just purchased an AGM battery for my Viper. From Caltric. , Hitachi is the manufacturer of their batteries and I want to try it as many of the Yuasa batteries I have put in my 4 stroke sleds have lasted only 2 years. AGM batteries are supposed to provide superior power and have a much higher...

Just put the Arrowhead on my 2021 SRX. Will report out how it performs once i break it in.

Just bought a 2021 SRX from Hauck with their 240 tune and clutch kit. I am having them put the Arrowhead 130 track on it and will report out on how it performs. I have the Ice Storm on my RTX Viper now and its ok for general riding but it could use more breaking control which I think the...

a friend of mine used rubber cow matting in his 24' trailer. we run our sleds in and out of it all the time with 9" carbides and studs in the tracks and haven not torn/cut it up yet. been using the trailer for at least 8 years this way.

Winters lately seem to follow the precipitation amount we get in spring/summer. So if this spring/summer is an indicator for the upcoming snow season, get your sled and wallet ready because there will be a LOT of gas run through your sled with all the snow we could get if the snow follows the...

Well I found the issue this spring when I tore the sled apart. Apparently dumb-#*$&@ me did not cut the clutch side hyfax off at all last fall when I put a new set in the sled and the track clips were catching it. I also went through chain case, jack shaft and all bearings to ensure none of them...

thanks for the video, that is exactly how my suspension looks and the Tri-hub spins with brand new hyfax installed.