Search results

Hello, last year I had the dreaded limiter strap fail and all the things that go with it. I replaced them with a generic brand and matched the holes. I am getting the sled ready to and noticed they've started to tear again. I'm going to buy the yamaha factory ones to replace them. Can...

That's the strange part, the sled now sits higher with no sag anymore, where it used to stay as you described. It still seems relatively stiff, but pogos terribly. It bottoms out on everything and springs back quickly.

thanks for the reply. I'm just not sure that the shock is blown. The sled behaves indicating it is, but when I removed it its stilll hard to decompress, and very slow to rebound??

Hey everybody, any help on this would be great. Here's what happened. I broke both my limiter straps on my 09 xtx. When this happened the rear shock rotated around the lower mounting shaft locking the rear skid and bending the two support bars on either side of the shock. I replaced the...

I ran a set if the Dupont sliders last year with good results on my xtx. I put on 1500mls with minimal wear. However, they are wearing a little more right where the rails tip. I was going to just replace the wheels at the bend with 135mm ones. The other wheels are still in great shape...

The next option on the chart from the website went right to 6/6. I wonder if a 6/2 or 6/4 would be effective?

I'm about to order these skis........just not sure of the carbide setup. I have an 09 XTX with 114 studs. 90% aggressive trail riding. Should I go with the 2-4 or the 2-6? Any feedback would be great.

Thanks everyone. I'm gonna go with the boost. :Rockon:

Quick question about the yamaheater with boost for my 09 XTX. Is it recommended to buy the kit with the boost? I live in Southern Ontario so it doesn't get crazy cold.

I am going to try SJ's setup this year. I just got the XTX and will use this for my baseline. I notice most of the riders are 200+lbs. Im a little guy, 5'6 160lbs. Any suggestions with where I should start with the center shock?

Sounds crude but I used a pipe wrench. Just put a rag under it to minimize scratches and get it to turn.

Sounds crude but I used a pipe wrench. Just put a rag under it to minimize scratches and get it to turn.