Search results

Thanks guys. Will check with my local shop.

Ok will pull the cover and look. Had a buddy indicate there is a known issue with the fuel pump / injector relay freezing as well? Is there a bulletin on this and I assume this is not a free update either ...

Just one outside of one I added for a 12 volt plug for GPS

That is the one above the rad correct?

hey all wanted to pick the collective brain trust. Was out last night for a quick ride. Made it into Coldwater and the high beam light flashed and the engine died. I had a code 81 flashing for a bit I have seen this in the past the grips are the issue and I have not sorted them out. I did...

Thanks, so remove the wheel and rotate so the spring will pass? A lot of tension on there I assume putting this back will not be fun either :( Lowering the setting on the adjustment to "S" would help as well. Looks like 4 or so bolts after than and the pivot removal seems to be another fun...

So poking around I can find a few references to changing the upper large wheels. Yamaha Part # 8GC-47530-10-00 2007 Phazer GT. I can see that the spring pre-load has to be released as it goes around the shaft that the wheels are pressed on. Wondering if there is some detailed info on...

Thanks Mooseman, I have heated grips again!! Cheers!

Thanks Mooseman, will get to my local dealer and grab the harness.

Mr E They are 2 separate circuits, do you see the bars move on the console when you activate the thumb switch?

Measured voltage on both sides, we know the voltage is low on idle and increases with throttle. Around 4k I get 6 or so volts to the grips. With the sled running on the stand I can feel a really faint amount of heat nothing that you would ever feel at -20 with gloves on, the throttle is hot as...

Both are out :( End of season so time to put things right. Will check Mooseman's suggestion with the updated harness and see how that goes. Thanks

Thanks no continuity between the bar and warmer. Did not find the part out you mentioned, reached out to another in Hamilton but bar was sold. I'll see if one of my local dealers has the Series Harness, the code still is a little worrisome. Thanks a lot.

Yeah sorry have not completed... I am between Barrie and Orillia On. Good tip on the test!

Have not pulled the grips yet, I've actually been trying to find a set of 07 bars in case that is the issue, local guy wants $100 bucks which is redic for used. I can call the local Yamaha dealer to see if they can supply the new harness update. Old owner said the stick bars worked well...

Loads of topics mine has a twist. 07 Phazer GT 7000km, prior owner replaced the straight bars with a 2008 set of risers. I purchased shortly after, he had indicated the warmers were rather weak and I got a code 81 on my first ride but has not come again. There is zero heat on the grips...