Search results

thank you!!! I will add a few pictures when I am done with the install.

Do you mean from the cooler to the added hyrax protection there must be at least 1.5 inches...sorry for my mental lapse right now haha

What do you exactly mean by adding clearance. My stock protectors run all the way back and go over the rear cooler ( I bent them when installing and then bent back. Reinforcing them with some brackets on the side just in case). My plan was to add the hyfax like yours. Not sure why i am confused...

thanks CaptCaper thats exactly what I am looking for. I am going to use the existing tunnel protectors and add the hyrax as recommended. Planning on going with 108 and not touching the outside of the track. Did you have any issues with rubbing after that or any issues with it rubbing on the...

CaptCaper - do you have pictures of your setup. I am in the process of doing studs on an 07 Attak GT with the added rear cooler.

Ordered the rear cooler...should be in tomorrow. In the mean time I installed the scratchers, will try them out this weekend. Definitely will be adding the eye hooks as they are already scratching up my rail

Looks like the consensus is to put the rear cooler in. I took a quick look underneath and it looks like ill have to cut a small section of the protectors out to fit the cooler. Seems like a pretty straight forward install to me?

Awesome! Do you also have cable style? Did you have previous overheating issues and the scratchers solved them? I appreciate the feedback. I am hoping to not have to install a rear cooler until the off season if I had to.

So you drilled through the 3 layers of rail and it was alright? I was hoping someone had chose this location. Did you need to get a longer bolt?

Thanks! Did you have prior over heating issues?

What originally got me started on this... Last week I rode for 5-6 hours with no over heating issues. On the final drag back to the truck, a 4-5 mile stretch at high speed the yellow light came on. Trails were hard packed snow, not really any powder. I'm running a non studded track also. I...

Did you have to fabricate a bracket for the skis? Do they stay up on your ski when not in use or did you install an eye hook.

Here are the two locations that I was originally thinking about. The blue location may be too far forward and there is no place to hook them up if i don't need them. The red location is where the 3 pieces of rail are bolted together. I was hoping to only drill through 1 piece of rail. Also, I...

I have a 07' Attak GT. I recently bought a set of cable style ice scratchers. I have read almost every article on here regarding scratchers and still have questions. I want to mount them on the rail and the only logical location is where the 3 pieces meet. Does anyone have a picture on where...