Search results

Beenba any update on you mechanical solution, anxiously waiting?

There's a couple speedo relocate setups out there, one on the riser, maybe that's what you have, and another that moves it back 3 or 4 in. and pivots which may not be far enough. I meant to ask, there have been a couple guys with the super chargers that said they had heating issues, any problems...

m.schuey7 I see you mounted your speedo on the riser, did you extend the harness yourself or does somebody make an extension. The sled looks great btw, did you take the C&A's off and put Curves on?? Signature says Curves. I put a set of C&A mountains on and really like em. Are you able to...

I'm all for supporting these guys, there would be alot of trial and error without them, and it's nice to deal with people who go out of there way to get you going. I just put Rocz yamaheaters on last week and wow those are great, I will be getting his HIDs setup. I picked this Nytro up last...

I've got a YPY spring and the quiet kit, was looking for the rollers, Yamaha parts houses have 14.5 rollers for about $150 and I see Schmidt Bros. say there's are 14.7 for $80 something, wonder how much the .2 of a mm would make. This is all new to me so if these sound like dumb questions...

Can anyone tell me where to get 14.5 rollers for the nytro??

MrSled Are you running either a Turbo or Super Charger and do you have cooling issues. Do you know if there's a lower temp thermostat.

Thanks for the reply Muffin, I'll have to look into the running hot issue, that's the first time I ran across that. Was your fan working? I'm new to this Yamaha and didn't know it had a fan, I've never heard it come on which doesn't surprise me, all the noise from the clutch. Was that a...

Muffin, I know the thread is a year old, looking into a supercharger for my recent purchase of an 09 nytro,first 4 stroke and lovin it. You say it burns about 8 mpg, is that a pump gas SC and what kind of boost do you run, any issues being a year later??

murdered141 you say to grind down the roller pins for a permanent fix, can you give me a little more detail on that, I picked up an 09 nytro last fall, clutch rattles like crazy, bought a kit to fix, metal washers, it was good for maybe an hour and back to the same. A permanent fix would be...

I think I got it figured out, I had set everything up pretty much to measurements people had used for the AC skids under the thought that the 2013 skid would be the same, all the control arms are the same lengths of the earlier float skids but it turns out the rails and where the control arms...

Hey ZX still working on the 2013 ac skid install. Slow going, I've run into a snag and can't figure out what's going on. Got the skid all rebuilt, new shocks, springs, bushings, painted etc. Located and mounted without the track on, now I've put the track on and in order to mount the front...

Hey I just found these pics, never got a e-mail about it. That's what I was wandering on the exhaust, I'm putting a 13 AC skid in mine, knowing what I know now looks like the Polaris skid is the better option, with the longer travel on these skids over the stock things would have to be pretty...

Snakebit any chance of getting some pics of your exhaust, and some info on your a-arm mod? how much did you kick it forward and what have you got for a ski stance?

Hey Guys, basically a newbe, had a conversation elsewhere and thought I would post here to see if anyone has some input. I'm in the process of putting a 2013 AC XF1100 153 skid in my 09 nytro mtx, rear front shock, Zero Pro 2704-172, 11.76", Hygear 200 lb. spring, rear center shock, Zero Pro...

Hey great, It looks like the tank just goes inline on what I think is the breather hose. I haven't really looked close at how the stock set up works yet so it will probably make more sense when I do. I finally found all the stuff on the Grizz sub frame gussets, that being a must. Thanks for...

Zx I'm not having any luck on the "roll over tank" anything you got on that would be a big help, also looking at the skid plates per your advise.

Your putting all kinds of ideas in my head. The pro climb front, spindles especially would look good on the nytro, I'm pretty sure that the arms are already chromoly, modify them to fit the whole front suspension, coming up with one cheap enough might not be easy. Need to finish this pro climb...

I was wandering about the roll over valve, don't see much talk about them and yes spendy and looks complicated, don't like the idea of the teather activating it. Very interested in your roll over tank set up. I had a 13 AC pro climb 800 162 before this and if I remember right they were 37" c...

I had thought about putting together a jig and building my own a arms, done alot of work with 4130 and you just convinced me to do it. Did you stay with the stock spindles? I think I saw something on you tube with grizz welding in the gussets. I bought this nytro a couple months ago and...