Search results

Where can I find aftermarket A-arms for a RS nytro 2006? I need the upper arms for both sides

I have also played with the thought of switching the skid.. Nytro RS skid might be the worst skid they have ever made. I have broken almost every part in it :(

I checked with Timbersled he got the Titanium kit but that's quite expensive :P

I have checked with them but they only got the kit that makes it wider to 45" Well found the lower arms from ebay SPI chromoly. Hoping to get hold of the upper arms aswell

I tired to check with Jokersracing for a-arms but they were out of stock until summer... Can someone pls help me to find someone that sells a-arms

I found some aftermaket that was for Vector but when I got those home they were 4cm too short.

Yeah I'm thinking on having them shipped from US they cost 350euro each over here! That would be 470US dollars each here :( I could use some help with who sells A-arms

I need a new set to both sides any idea's where to get them? I'm confused from yamaha's site there are three different types 8ES-23570-00-00 FRONT LOWER ARM COMP. (LEFT) SM1 8ES-23570-30-00 FRONT LOWER ARM COMP. (LEFT) DPBMC 8ES-23570-50-00 FRONT LOWER ARM COMP. (LEFT) YB Whats the...

Was it a big difference between 96 -> 144? I have ordered a kit with 144 Golddiggers... Have you by the way had any problems with studs hitting your exhaust? They destroyed my Excell headers, so now i´m back to original cause I can´t find another excell around here anymore :/

Ice Ripper is no way as good as 96 studs :) A friend got one last year and not a chance he could keep up with me! Thinking on a Camoplast 9052H Cobra track now + 144 studs but dont know the difference on woodys studs... Is the golddigger the way to go or do the cheaper studs work ok aswell...

I have run 96 studs on my nytro for a few years and now I need to change the track. Again thinking on a new Camoplast Ripsaw but 144 studs.. Has anyone run 144 studs in the middle? Any opinions about Woodys stud kits like KSBS-1325-144 or KGBS-1325-144

I got 96 in the middle, found one problem.. They destroyed my headers from excell. With original headers no problems so far. But next track will have more than 96 thats for sure

Found 1 carb loose, but that did not solve the problem. Checked more on TORS and it is connected. How does it work? It seems a bit odd because when he tried to hold the throttle to check the switch, it still went to 10k rpm.

Yes I'm sure about the air filter, we had it open! Dont know the sleds history, he just bought it. It did run fine for a couple of days but then this happened when he was riding. Driveline is ok. Will do a engine compression test. The idle rpm is ok, it's when he hit the throttle from idle it...

Ok! What about exhaust donuts on 4 cylinders, same as on the 3 cylinders? Can it affect this much?

I got a friend who just bought an 2005 RX-1 and it suddenly lost a lot of performance while he was driving. It almost sounds like the choke is on all the time, but that is checked. We also checked spark plugs and they are brown and nice. When he hit the throttle it is like it's getting way too...

Same thing happened to mine 06 nytro last year, broke the aluminium slides on both sides... It was the bolts on the wheel axle that came loose... Not cheap Now it's loctite everwhere :D

Got a cople but they have been on a skidoo, will they fit or do I need different mounting

What about SLP Powder pro skis on -06 RS Nytro?

What are you guys using? I have used Yamaha oil in the engine for a couple of years but are there any other brands that can be used?