Search results

i put in the mcxpress last year,and had a hell of a time clutching it ,,had to try diff, ramps, springs weights ,but have it close now the weights were a little light and i was hitting the rev limiter even at 9000'not good with 14 lbs of boost,but my set up is a hindle pipe ,manual boost...

sounds promising, i guess anything is better than the stock track i wasn't to impressed when the paddles started to rip off.i have some race gas i will be trying, and with the manual boost controller and adjustable weights on my clutch i should be able to dial it in pretty quick this year.

I have a turboed phazer ,last year i was running the stock 144" track ,lots of power,, just no traction and limited flotation..has anyone run the 151"x2.3?? if so how did it compare , also looking for clutchin tips??goin to the mountains in a couple weeks and really looking forward to it. :-o

where is timber sled?

still have stock track and wanting to up grade,but wondering how long is to long?any one seen or heard of a track that really performs in the mountains..also considering a aftermarket suspension??

I have my machine running really well now but i am under tracked,still have 144"x14 ,,i am looking to see if anyone has tryed and tested a longer track? lots of talk about 151"camoplast,, but anything longer or wider??also wondering if anyone knows if there is a aftermarket rear suspension. :-o

well my machine ran great the whole 4 days i had it in the mountains,,combination of clutching and the new snorkle kit ..very impressed..just need more track now..

go to tracks usa dot com.they have 151 x 14..is an extra 1/2 an inch wide going to make a diff???

AHHH ...71 views and no one knows???well i am going to try a new mountain clutch set up this weekend with turbo set up and new snorkle kit.6800 '

aksteepndeep,i have a mcx ,hindle pipe.and aluminum airbox with alum.snorkle to a k&n.

I also have a turboed phazer,but with a hindle pipe ,and it doesn't like to start when its cold.the dealer is going to put a cold start kit in it.but i wont know how its going to work now that the snows melting.

trow a pair of trail scratchers on..bolts right on to the rails approx $100.00

Does anyone know the baseline clutching for a 07 phazer mcx turbo hindle exhaust ,altitude 3500'.??? :o|

well i have the new batt. and still hard to start..dealer is going to put a cold weather kit on it next week hope it helps..last week -35c now its plus 15c..help... the snows melting.

i have the same prob with my phazer starting and my dealer said i need a new battery??the new efi system need 100% battery charge for the machine to start.battery is on order hope it works..

I had to install a new battery after one year of riding,had problems starting in temps under -15c .even worse with the low compression with the turbo kit.dealer said if the battery ins't disconnected or on a battery maintainer you stand the chance of only maxing your battery at 80% charge and...

thanks aksteepndep i will do that, which kind? and where do i find a kit to extend the air filter??and about the exhaust the dealer suggested a hindle pipe ,he said the mcx one caused to much back pressure?also i have a problem with it starting in temp below -15c so he is saying that my battery...

Just had my phazer turboed mcx kit ,and im not to happy with how its running,the dealer put a diff clutch kit than the mcx kit because at our 3000' elv. it was running 15 psi and hitting the rev limiter?so with this other kit it engages at 6100rpm and runs at 12psi at 11,500 rpm.but the kicker...

just had mine turboed mcx kit,the dealer put a diff, clutch kit in for around here 3000' because the mcx one was running 15 psi and hitting the rev limiter,so im just wondering does anyone here have one done that could tell me if im not getting the run around?my clutch engages at 6100rpm and in...

altitude sensor i was told form a yammy mechanic that the alt. sensor will ice up also and suggested to raise it up higher ,or tilt it more to drain?also the airfilter on mine will ice up which restricts air flow..there is someone that buils a big air kit to prevent this problem works well in...