installation

I just put a replacement track on my 2015 MTX. My first endevor tearing into the Viper that deep, I learned a lot about he machine! I have the chain case all reassembled, leaving me with just the brakes to reinstall. I did not split my caliper, just unbolted the 3 bolts from the frame and...

Hi, I'm new to this forum although I have followed TY 4 Stroke for the past couple of years. I am installing a temperature gauge on my 2012 Apex XTX and need to know the best/easiest locations to tap in to the 12V and Ground wires. Reading through the other temp gauge installation blogs, the...

Hi guys, I broke the sway bar on the left side just inside where it enters a plastic housing. Can anyone tell me how to remove and replace it? Do I need to remove the skid plate to get at the mounting brackets? Any other hints? Thanks!

Hi Folks, I'm new here but have already benefited a lot from the wealth of information - thanks to all the contributors. I recently picked up a 2009 Nytro XTX and a "gently used" FPP Stage 1 kit that I am preparing to install now. The kit appears to be more than complete (even came with a...

Hey guys just blew my first starter on my 14' viper xtx. I have a shop manual but it isnt much help. All it tells me is i need to remove both clutches the air intake, fuel tank and 2 motor mounts then "gently" pry on engine to access starter? im sure someone here has replaced a starter and can...