yamaha-rider
Extreme
no help on this one
Len Todd
TY 4 Stroke God
Why did he put in a new slide? Something made him do that. Also, did the little O-ring get in under the plastic cap, which is on top of the carb? Are the clips on the needle jets set to the same on all 4 carbs?What color are the springs on the needle jet?
yamaha-rider
Extreme
i guess it was just not working, and i will have to check on the rest,by plastic cap you must mean the one on top of the carbs.
Len Todd
TY 4 Stroke God
I do mean on the top of the carbs.
yamaha-rider
Extreme
ok i asked the guy and he said that they are all stock , i hope that helps
HEAVYD
Extreme
curious to see what you found. If that o-ring is missing it would cause a lean condition on that
cylinder most notisable at idle or just above when
the slide is closed or just starting to open.
cylinder most notisable at idle or just above when
the slide is closed or just starting to open.
yamaha-rider
Extreme
well i have gotten botherd buy this dam thing so i am taken it to a freind of mine that is a yamaha tech fairly soon,seeing how we really dont have any snow,so i am not really missing any riding.
Len Todd
TY 4 Stroke God
That is probably a good idea. If you were over here, I would have asked you to drop in, a long time ago.
yamaha-rider
Extreme
ya i have tryed not to do this but i cant figure it out, i mean i know enough to keep it going but thats bout it.
Similar threads
-
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.