04 Warrior vs 06 Mach Z VERY INTERESTING

[Bob Miller]

Just got back from a trip in Shawinagan Quebec. We had in our group an 03 Rev 800, 02 MXZ 700, 05 RX-1, 06 Mach Z , and my 04 Warrior with some performance enhancements
I must say my Warrior was running VERY STRONG
It would pull away from the 05 RX-1 8)
So the time came to challenge the Mighty Mach Z
The Mach was stock with 144 studs up the middle and my Warrior has no studs.
We where up in La Tuque and there happens to be a real long flat straight away up there. So I pull up next to the Mighty Mach not knowing what to expect 8) He weighs 150, I weigh 215. We start at 30 MPH and we both nail the flipper together We are both pulling hard and I can't believe it We are neck and neck at 50, 60, 70, 80, 90 MPH. I'm holding off the Mighty Mach Z with my 04 Warrior Wooo Hooo! And I weigh 65 lbs more than this guy 8) Neither one of us is letting up! And than at about 95- 100 MPH he very slowly starts gaining inches on me, and by the time the straight away ends he had gained one sled length.
I've got to tell ya with only about $200 in parts and good information from blackjohn and Otis, this Warrior really hauls

 

[yamahajunkie]

good news!!!

 

[black john]

glad i could help bob but theres still some left on the table

 

[JDMCRX]

Nice man

Whats ur set up?

 

[Bob Miller]

glad i could help bob but theres still some left on the table

John,
You have always given good advice And you know I'm all ears

 

[Bob Miller]

Nice man

Whats ur set up?

Here is what I have done:
Primary Clutch: OSO spring, 14.5 mm rollers
Secondary Clutch: Silver Spring @70 degrees, shimmed with 5/16 lock washers.
Engine: 4 TPI valves with 160 main jets, Green Holtzman Springs, NGK CR10EK Spark Plugs
Track: SLP anti-wear pads.

Enjoy,
Bob

 

[yamahajunkie]

little quicker with the 14.5s eh

 

[Bob Miller]

little quicker with the 14.5s eh

GITTY UP

 

[Black 1000]

Bob any idea what rollers come in the stage 2 kit from the speed shop?

 

[BOUNTYHUNTER]

Just curious How Did Everyone React 2 UR WARRIOR?

 

[Bob Miller]

Bob any idea what rollers come in the stage 2 kit from the speed shop?

No, I'm not familiar with it :|

 

[Bob Miller]

Just curious How Did Everyone React 2 UR WARRIOR?

Well there where 3 Ski Doo guys and 2 Yamaha, and my friend on The Mach Z is extremely loyal to his brand He also owns an 04 Rev 800 HO.
Let me put it this way: There was a lot of silence!!!

 

[yamahajunkie]

Bob any idea what rollers come in the stage 2 kit from the speed shop?

14.5 are in most of the kits now. the new FI sleds come with them stock. they are also on 2 stroke tripples.

 

[JDMCRX]

Nice man

Whats ur set up?

Here is what I have done:
Primary Clutch: OSO spring, 14.5 mm rollers
Secondary Clutch: Silver Spring @70 degrees, shimmed with 5/16 lock washers.
Engine: 4 TPI valves with 160 main jets, Green Holtzman Springs, NGK CR10EK Spark Plugs
Track: SLP anti-wear pads.

Enjoy,
Bob

How do you like the TPI valves Im thinking of doing a set on my RX-1 and 160 mains and red holtz

 

[jminor1]

I need to put in my thanks to Black John as well. I appreciate all your advice!