04 Warrior vs 06 Mach Z VERY INTERESTING

[newrx1guy]

Are you runing the stock weights with the 14.5mm rollers?What is the advantage of the 14.5mm rollers?Thanks

 

[Bob Miller]

How do you like the TPI valves Im thinking of doing a set on my RX-1 and 160 mains and red holtz

They work very well without sacrificing fuel mileage, I was getting the same as the 05 RX-1, The Mach Z was getting almost as good, the MXZ 700 and the Rev 800 where drinking it up

 

[Bob Miller]

Are you runing the stock weights with the 14.5mm rollers?What is the advantage of the 14.5mm rollers?Thanks

BlackJohn recommended them for better accelleration and I believe they work well

 

[newrx1guy]

Are you running the stock weights? Thanks

 

[Bob Miller]

Are you running the stock weights? Thanks

YES, Stock weights

 

[yamahajunkie]

bob did you end up moving the weight from tip to heel?

 

[black john]

arm,s

yes all that with stk arms and rivets. amazzing eh.

 

[Bob Miller]

bob did you end up moving the weight from tip to heel?

No the weights are stock set up

 

[Black 1000]

Ok so you have been setting up the stock set up and are getting great results. Is this set up trailable or race or both? Congradulations on your findings by the way. I hope to be as successful messing around with mine.

 

[Bob Miller]

Ok so you have been setting up the stock set up and are getting great results. Is this set up trailable or race or both? Congradulations on your findings by the way. I hope to be as successful messing around with mine.

This set up is good for both And thanks to blackjohn for giving me the info