Iwankow
Newbie
I have an 05 Rage(same skid as Warrior), my problem is that the front of the skid wants to dive into the track. Unless I have the limiter straps right tight pulling up, the nose caps and sliders will burn out instantly. I figured this is how it was going to have to be set up and had have driven it this way for the last 2500 miles. However, last night the front pivot arm was destroyed, anyone else ever hear of such issues?
srxpotts
Veteran
rage tip wear
I have a rage and at 1950 miles mine too had wiped out the rail tips a eats the hyfax at the front. I took up about 3/8 on the limiter and cut the windows open and install light weight track clips with the holes in them to help lube the topes and hyfax. only got 100 miles on it so far, time will tell. If you find out something else let me know.
I have a rage and at 1950 miles mine too had wiped out the rail tips a eats the hyfax at the front. I took up about 3/8 on the limiter and cut the windows open and install light weight track clips with the holes in them to help lube the topes and hyfax. only got 100 miles on it so far, time will tell. If you find out something else let me know.
Your w-arms may have been broken and you didn't know it, those were an easy fail, and most have been reinforced or replaced by now, but I don't think yam. beefed them up at any point so even if you get a new or good used one I would reinforce it with a couple #'s of 1/8" X 3/4" flat stock.
