05 RX1 Questions....

[snowmonkey]

RX 1 2005

I am thinking about getting an o5 rx1. But I have read some bad things about these sleds. Can someone give me some advise are there reaLLy that many problems with them. And I hit a rock with my sled on the right front corner of the bulk head. It just wrinkled the aluminum pan and one rivet is missing. It also made the seam where the edges meet a 1/4 inch wide is there something I can put in there to close it?
thanks

 

[98srx6]

Re: RX 1 2005

I am thinking about getting an o5 rx1. But I have read some bad things about these sleds. Can someone give me some advise are there reaLLy that many problems with them. And I hit a rock with my sled on the right front corner of the bulk head. It just wrinkled the aluminum pan and one rivet is missing. It also made the seam where the edges meet a 1/4 inch wide is there something I can put in there to close it?
thanks

Are you drunk?

 

[Auskins]

are u going to give us a week or 2 for these to set in?
I think it is a great way to improve the site...
Keep it up Mr. Sled!

 

[Chance]

I think that you've had ample time to adjust.....Posted: Sun Nov 23, 2003

 

[impalapower]

That was too much to read at once. I'm a good boy so I need not to worry.

 

[impalapower]

That was too much to read at once. I'm a good boy so I need not to worry.

 

[Chance]

You can say that again Kevin.

 

[Mark O]

Re: RX 1 2005

I am thinking about getting an o5 rx1. But I have read some bad things about these sleds. Can someone give me some advise are there reaLLy that many problems with them. And I hit a rock with my sled on the right front corner of the bulk head. It just wrinkled the aluminum pan and one rivet is missing. It also made the seam where the edges meet a 1/4 inch wide is there something I can put in there to close it?
thanks

By chance, did the rock hit your head too?

 

[cobalt650]

I may not be the brightest bulb on the tree, but I am having trouble figuring out this thread???

 

[ReX]

I may not be the brightest bulb on the tree, but I am having trouble figuring out this thread???

Your not the only one...

 

[Red2003]

SnowMonkey, help us here. It sounds like your looking at a bent up 05 RX1. Yes?? No?? If its hit a rock and the bulkhead is bent up, you don't want it. Its not a matter of filling in that 1/4 in gap, its a matter of $1500.00 in parts and 30 hours of labor. Look for something else. If thats not the question, then yes, you are drunk.