AttakDog
TY 4 Stroke Junkie
Hey just wanted to get some info on the rachet problem on my Attak. i have 5000+ miles now and at the end of the year the track started to rachet badly. I like to run it slightly loose to save the hyfax but I think the drive rollers and the track drive lugs are toast. may have to switch to internal/external drivers and a new fully clipped track but would like to spend a little less money than that. Any suggestions? If I do put on the drivers whta size and make to use? just punch the stock track? It liked to rachet in the deeper snow and holeshots especially.
Yamahammer485
TY 4 Stroke Guru
If your inner lugs are toast, then just cut out the windows, clip all the cut windows and every window, then run the extroverts.
I havent seen a track that has the inner lugs wrecked yet, no matter how badly the track has ratcheted, so you might be ok. But thats just from what I have seen.
I havent seen a track that has the inner lugs wrecked yet, no matter how badly the track has ratcheted, so you might be ok. But thats just from what I have seen.
richierich
TY 4 Stroke Junkie
- Joined
- Apr 23, 2003
- Messages
- 645
- Reaction score
- 1
- Points
- 943
- Location
- Greenville,WI
- Country
- USA
- Snowmobile
- 08 Apex LTX
i agree.i doubt your inner drive nubs are bad.
i have the anti racthet drivers and track clips if you decide to go that way.that would be best way to fix your problem if your track isnt bad.or just replace track with fully clipped ripsaw since you'll have it out anyway and sell your used one if its good.i have those also
i have the anti racthet drivers and track clips if you decide to go that way.that would be best way to fix your problem if your track isnt bad.or just replace track with fully clipped ripsaw since you'll have it out anyway and sell your used one if its good.i have those also
