Nytrider109
Newbie
Could i add 1.750 studs on my 2008 fx nytro rtx? let me know thanks


BADSLED
Lifetime Member
- Joined
- May 13, 2004
- Messages
- 1,362
- Reaction score
- 20
- Points
- 1,073
- Location
- Syracuse, NY
- Country
- USA
- Snowmobile
- 2012 Nytro MC Xpress 270
2011 Apex SE
2021 Sidewinder LTX SE - SOLD
I wouldn't recommend you run anything longer then a 1.450" stud.
Nytrider109
Newbie
BADSLED said:I wouldn't recommend you run anything longer then a 1.450" stud.
Thanks alot
SledFreak
TY 4 Stroke God
- Joined
- Feb 7, 2005
- Messages
- 5,511
- Reaction score
- 465
- Points
- 1,733
- Location
- Ontario. Canada
- Country
- Canada
- Snowmobile
- Current 2020 ThunderCat. - SOLD!
BADSLED said:I wouldn't recommend you run anything longer then a 1.450" stud.
x2...
tapex_07
TY 4 Stroke Master
- Joined
- Feb 15, 2009
- Messages
- 1,160
- Reaction score
- 135
- Points
- 1,038
- Country
- USA
- Snowmobile
- '10 Nytro MTX SE IMPULSE 174x3
'14 Viper XTX SE MPI 159x14x1.25
'07 Apex RTX SC2 MPI 128x1
Im running a 1.75" on my 08 RTX. I usually check under the tunnel and heat exchanger after every ride. No nicks or scrapes.
Nytrider109
Newbie
tapex_07 said:Im running a 1.75" on my 08 RTX. I usually check under the tunnel and heat exchanger after every ride. No nicks or scrapes.
Cool thanks a lot, so i did not loose 300 bucks on studs

tapex_07
TY 4 Stroke Master
- Joined
- Feb 15, 2009
- Messages
- 1,160
- Reaction score
- 135
- Points
- 1,038
- Country
- USA
- Snowmobile
- '10 Nytro MTX SE IMPULSE 174x3
'14 Viper XTX SE MPI 159x14x1.25
'07 Apex RTX SC2 MPI 128x1
It measures 1 3/8" from the top of the track.


BADSLED
Lifetime Member
- Joined
- May 13, 2004
- Messages
- 1,362
- Reaction score
- 20
- Points
- 1,073
- Location
- Syracuse, NY
- Country
- USA
- Snowmobile
- 2012 Nytro MC Xpress 270
2011 Apex SE
2021 Sidewinder LTX SE - SOLD
You have to be clear how you are measuring your studs? Overall length from base of the stud to the tip or going by manufacturers specs which is usually exposed stud past the track. If it's an overal length you are reffering to you will be fine.
gmfamily2008
Pro
BADSLED said:You have to be clear how you are measuring your studs? Overall length from base of the stud to the tip or going by manufacturers specs which is usually exposed stud past the track. If it's an overal length you are reffering to you will be fine.
X2 , What kind of studs are these ? and is the manufacturer calling them a "1.75" or is this the overall measurement ?
Nytrider109
Newbie
gmfamily2008 said:BADSLED said:You have to be clear how you are measuring your studs? Overall length from base of the stud to the tip or going by manufacturers specs which is usually exposed stud past the track. If it's an overal length you are reffering to you will be fine.
X2 , What kind of studs are these ? and is the manufacturer calling them a "1.75" or is this the overall measurement ?
manufacturer calling them a 1.75, i wanna try them on a 1.50 track. will that be fine?


sleddingfarmer
TY 4 Stroke God
You don't want to stud a 1.5" track on a nytro, not with the stock 9 tooth drivers. It might clear everything, but if it does clear its going to be very close.
If tapex has a 1.5" track studded and he doesn't have any problems, then he is very lucky, but I predict his luck will run out sooner or later. Keep that track tight!
If tapex has a 1.5" track studded and he doesn't have any problems, then he is very lucky, but I predict his luck will run out sooner or later. Keep that track tight!
Similar threads
- Replies
- 4
- Views
- 1K
-
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.