136" Track / clutching

[Traildemon]

Going to 136 " studded ripsaw in 03 RX -1 , do I need to change clutching / gearing ? currently have heavyhitter primary set up with silver spring @70 deg secondary.

 

[LazyBastard]

Drop gearing 10% (drop 1 tooth on top and add 2 teeth on bottom) and throw a whole bunch of weight at your clutch.

 

[Turk]

Tighten the silver to 80 degree wrap. The 136 will make your driven upshift faster & your gonna have to slow down the shift by wrapping it a little tighter.

 

[4Fighter]

Tighten the silver to 80 degree wrap. The 136 will make your driven upshift faster & your gonna have to slow down the shift by wrapping it a little tighter.

I did that once (70* wrap). It cost me hole-shot and off-trail speed, but wanted to rip my arms off at 65+ down a plowed forest road.