donkickit
Pro
- Joined
- Sep 23, 2007
- Messages
- 152
- Reaction score
- 3
- Points
- 698
- Location
- Upstate New York near Albany
- Country
- USA
- Snowmobile
- 2014 viper ltx se
I'm greasing up the rtx and I found the two nipples on the skis,
5 underneath suspension.
It says to grease up the primary + secondary clutches. Anyone
know where the nipples are on the clutches?
Also, says to grease up the steering column bearing? Could not
find that either.
Any help appreciated.
5 underneath suspension.
It says to grease up the primary + secondary clutches. Anyone
know where the nipples are on the clutches?
Also, says to grease up the steering column bearing? Could not
find that either.
Any help appreciated.
06apexrtx
Expert
there is no grease fitting on those parts theat i know of.
Metallicat
TY 4 Stroke God
Holy Carp! You do not want to grease the clutches at all. That would be a disaster!
Honk
TY 4 Stroke Master
you read the manuel? Wow!
donkickit
Pro
- Joined
- Sep 23, 2007
- Messages
- 152
- Reaction score
- 3
- Points
- 698
- Location
- Upstate New York near Albany
- Country
- USA
- Snowmobile
- 2014 viper ltx se
It shows up on pg.3 of the periodic maintenance table?
The old polaris used to have a grease fitting?
The old polaris used to have a grease fitting?
LJ 452
TY 4 Stroke God
donkickit said:
That was for the bearing behind the secondary, which would be nice here. Hwever you don't have one on the RTX. So I would search "Jackshaft bearing", and "Driveshaft bearing". There's quite a bit of info to read up on.
Similar threads
