timc
Extreme
I've run Hiperfax on my last 4 sleds. I'v never had to replace them on any sled I put them on. In fact, I've gotten over 5000 miles on them and they have had lots of life left in them.
They are slippery and wear like iron. I put them on my Attak along with the wear pads from SLP in the closed windows. I've only got 500 miles on them but they show no wear. I wore out the OEMs in 900 miles last year. The melt point is twice as high as OEM and they will take a lot more abuse in low snow conditions.
TimC
They are slippery and wear like iron. I put them on my Attak along with the wear pads from SLP in the closed windows. I've only got 500 miles on them but they show no wear. I wore out the OEMs in 900 miles last year. The melt point is twice as high as OEM and they will take a lot more abuse in low snow conditions.
TimC
ROCKERDAN
OCD Sledhead
- Joined
- Oct 8, 2005
- Messages
- 7,496
- Reaction score
- 3,609
- Points
- 2,003
- Location
- Huntsville Ontario & Niagara NY
- Country
- Other
- Snowmobile
- '18 RTX 50th "Winder"
I run fully clipped track and also installed a front wheel kit and mid wheel kit by FIXpowersports.....no wear whatsoever anymore.
wheels are your answer,not slides.
Dan
wheels are your answer,not slides.
Dan
ROCKERDAN
OCD Sledhead
- Joined
- Oct 8, 2005
- Messages
- 7,496
- Reaction score
- 3,609
- Points
- 2,003
- Location
- Huntsville Ontario & Niagara NY
- Country
- Other
- Snowmobile
- '18 RTX 50th "Winder"
I run fully clipped track and also installed a front wheel kit and mid wheel kit by FIXpowersports.....no wear whatsoever anymore.
wheels are your answer,not slides.
Dan
wheels are your answer,not slides.
Dan
studdog
TY 4 Stroke Junkie
ice scracthers and or liquid drip of dishwasher detergent might help. No hyfax in the world will hold up to bare ice runnng.
apltx08
TY 4 Stroke God
studdog
TY 4 Stroke Junkie
altx98 nice way to mount scracthers
apltx08
TY 4 Stroke God
studdog said:
Thanks "Studdog" I cut those out of a peice of 2" x 4" x 3/16" Aluminum
I wanted a set-up that didn't put stress on the actual running board, by doing it this way its much stronger and self contained, I also wanted them as far front as possible to get as much ice/snow spray in the suspension, it actually works VERY well...
