Advice on alternate hyfax for ice running?

[timc]

I've run Hiperfax on my last 4 sleds. I'v never had to replace them on any sled I put them on. In fact, I've gotten over 5000 miles on them and they have had lots of life left in them.

They are slippery and wear like iron. I put them on my Attak along with the wear pads from SLP in the closed windows. I've only got 500 miles on them but they show no wear. I wore out the OEMs in 900 miles last year. The melt point is twice as high as OEM and they will take a lot more abuse in low snow conditions.

TimC

 

[ROCKERDAN]

I run fully clipped track and also installed a front wheel kit and mid wheel kit by FIXpowersports.....no wear whatsoever anymore.

wheels are your answer,not slides.

Dan

 

[ROCKERDAN]

I run fully clipped track and also installed a front wheel kit and mid wheel kit by FIXpowersports.....no wear whatsoever anymore.

wheels are your answer,not slides.

Dan

 

[studdog]

ice scracthers and or liquid drip of dishwasher detergent might help. No hyfax in the world will hold up to bare ice runnng.

 

[apltx08]

try scracthers, custom made and they work great for me

 

[studdog]

altx98 nice way to mount scracthers

 

[apltx08]

altx98 nice way to mount scracthers

Thanks "Studdog" I cut those out of a peice of 2" x 4" x 3/16" Aluminum

I wanted a set-up that didn't put stress on the actual running board, by doing it this way its much stronger and self contained, I also wanted them as far front as possible to get as much ice/snow spray in the suspension, it actually works VERY well...